R13-13-303. Minimum Standards for 11 to 15 Passenger Vehicle Operation

A. A 925 Driver shall comply with the equipment operations checks as specified in R13-13-108(D), (E), (F), (G). B. Loading and unloading of passengers. 1. Shall not stop on a highway, interstate or primary roadway to load or unload passengers. 2. Shall stop in low-traffic volume areas with speed limits at or below 35 miles per hour; such as, residential driveways, residential roadway curb areas in front of homes and parking lots. 3. When loading or unloading passengers from a 925 Vehicle, the 925 Driver shall place the vehicle in park, activate the four-way amber (hazard) flashers and activate the high-mounted flashing light specified in R13-13- 302(B)(4). 4. Passengers shall not load or unload on the traffic side of the vehicle. 5. The 925 Driver shall comply with R13-13-104(B)(9 through (14). 6. For railroad grade crossings, the 925 Driver shall comply with R13-13-104(B)(15) with the addition of a requirement to activate the high-mounted flashing light as specified in R13-13-302(B)(4). For vehicles without a service door in R13-13-104(B)(15)(d), the right front window shall be fully opened or fully rolled down. 7. When loading or unloading a special needs passenger, the 925 Driver shall secure the passenger and wheelchair as specified in R13-13-105. C. The 925 Driver shall comply with the time requirements as specified in R13-13-104(C). D. The 925 Driver shall comply with the record-keeping and other requirements as specified in R13-13-104(D) and (E). E. Seatbelts and Restraints. 1. The 925 Driver shall not remove the vehicle from park until the driver and all passengers are properly wearing their seatbelts or properly restrained, 2. All 925 Drivers and passengers shall properly wear or use all safety belts and restraints unless loading or unloading from a 925 Vehicle. F. Doors equipped with child safety locks shall not have the lock engaged allowing the door to be opened from the inside.