Gear Certification

Standard Affected Subject Fed. Reg. Date Action Subpart A—General Provisions Section 1919.1 Purpose and scope 1919.2 Definition of terms Subpart B—Procedure Governing Accreditation 1919.3 Application for accreditation 1919.4 Action upon application 1919.5 Duration and renewal of accreditation 1919.6 Criteria governing accreditation to certificate vessels' cargo gear 1919.7 Voluntary amendment or termination of accreditation 1919.8 Suspension or revocation of accreditation 1919.9 Reconsideration and review Subpart C—Duties of Persons Accredited to Certificate Vessels' Cargo Gear 1919.10 General duties; exemptions 1919.11 Recordkeeping and related procedures concerning records in custody of accredited persons 1919.12 Recordkeeping and related procedures concerning records in custody of the vessel Subpart D—Certification of Vessels' Cargo Gear 1919.13 General 1919.14 Initial tests of cargo gear and tests after alterations, renewals or repairs 1919.15 Periodic tests, examinations and inspections 1919.16 Heat treatment 1919.17 Exemptions from heat treatment 1919.18 Grace periods 1919.19 Gear requiring welding 1919.20 Damaged components 1919.21 Marking and posting of safe working loads 1919.22 Requirements governing braking devices and power sources 1919.23 Means of derrick attachment 1919.24 Limitations on use of wire rope 1919.25 Limitations on use of chains Subpart E—Certification of Vessels: Tests and Proof Loads; Heat Treatment; Competent Persons 1919.26 Visual inspection before tests 1919.27 Unit proof tests—winches, derricks and gear accessory thereto 1919.28 Unit proof tests—cranes and gear accessory thereto 1919.29 Limitations on safe working loads and proof loads 1919.30 Examinations subsequent to unit tests 1919.31 Proof tests—loose gear 1919.32 Specially designed blocks and components 1919.33 Proof tests—wire rope 1919.34 Proof tests after repairs or alterations 1919.35 Order of tests 1919.36 Heat treatment 1919.37 Competent persons Subpart F—Accreditation to Certificate Shore-Based Equipment 1919.50 Eligibility for accreditation to certificate shore-based material handling devices covered by § 1918.13 of the safety and health regulations for longshoring 1919.51 Provisions respecting application for accreditation, action upon the applications, and related matters Subpart G — Duties of Persons Accredited to Certificate Shore-Based Material Handling Devices 1919.60 General duties, exemptions Subpart H — Certification of Shore-Based Material Handling Devices 1919.70 General provisions 1919.71 Unit proof test and examination of cranes 1919.72 Annual examination of cranes 1919.73 Unit proof test and examination of derricks 1919.74 Annual examination of derricks 1919.75 Determination of crane or derrick safe working loads and limitations in absence of manufacturer's data 1919.76 Safe working load reduction 1919.77 Safe working load increase 1919.78 Nondestructive examinations 1919.79 Wire rope 1919.80 Heat treatment 1919.81 Examination of bulk cargo loading or discharging spouts or suckers 1919.90 Documentation (Effective February 11, 1980) Part 1918 Authority 6/8/11 Amended 1918.2 Definitions 6/8/11 Amended 1918.95 Sanitation 6/8/11 Amended (Effective September 5, 2012) Subpart Index for 29 CFR 1919—Gear Certification. Sec. 31-372-106-1919. Gear certification Part 1919 Authority 6/8/11 Amended 1919.6 Criteria governing accreditation to certificate vessels' cargo gear 6/8/11 Amended 1919.11 Recordkeeping and related procedures concerning records in custody of accredited persons 6/8/11 Amended 1919.12 Recordkeeping and related procedures concerning records in custody of the vessel 6/8/11 Amended 1919.15 Periodic tests, examinations and inspections 6/8/11 Amended 1919.18 Grace periods 6/8/11 Amended (Effective September 5, 2012) Title 29, Chapter XVII, Part 1926 as published in the Federal Register, Volume 39, Number 122, June 24, 1974.