Industrial safety code Standards (Repealed)

Section 1. The following occupational safety and health standards promulgated by the Secretary of Labor of the United States Department of Labor under the authority of the Williams-Steiger Occupational Safety and Health Act of 1970 (84 Stat. 1590-1620). The standards adopted are Title 29, Chapter XVII, Part 1910 promulgated on October 4, 1972 and published in the Federal Register, Volume 37, Number 202 as of 18 October, 1972. These standards shall apply to all employment performed in a work place in this state. Any charges, deletions and interpretations subsequently made are herewith adopted as regulations as if fully set forth herein: Code of Federal Regulations Title 29, Chapter XVII PART 1910 — Occupational Safety and Health Standards Supbart B Section 1910.12 Construction work 1910.13 Ship repairing 1910.14 Shipbuilding 1910.15 Shipbreaking 1910.16 Longshoring 1910.19 Asbestos dust Subpart D — Walking-Working Surfaces 1910.21 Definitions 1910.22 General requirements 1910.23 Guarding floor and wall openings and holes 1910.24 Fixed industrial stairs 1910.25 Portable wood ladders 1910.26 Portable metal ladders 1910.27 Fixed ladders 1910.28 Safety requirements for scaffolding 1910.29 Manually propelled mobile ladder stands and scaffolds (towers) 1910.30 Other working surfaces 1910.31 Sources of standards 1910.32 Standards organizations Subpart E — Means of Egress 1910.35 Definitions 1910.36 General requirements 1910.37 Means of egress, general 1910.38 Specific means of egress requirements by occupancy (Reserved) 1910.39 Sources of standards 1910.40 Standards organizations Subpart F — Powered Platforms, Manlifts and Vehicle-Mounted Work Platforms 1910.66 Power platforms for exterior building maintenance 1910.67 Vehicle-Mounted elevating and rotating work platforms 1910.68 Manlifts 1910.69 Sources of standards 1910.70 Standards organizations Subpart G — Occupational Health and Environmental Control 1910.96 Ionizing radiation Subpart H —Hazardous Materials 1910.101 Compressed gases-general requirements 1910.102 Acetylene 1910.103 Hydrogen 1910.104 Oxygen 1910.105 Nitrous oxide 1910.106 Flammable and combustible liquids 1910.107 Spray finishing using flammable and combustible materials 1910.108 Dip tanks containing flammable or combustible liquids 1910.109 Explosives and blasting agents 1910.110 Storage and handling of liquified petroleum gases 1910.111 Storage and handling of anhydrous ammonia 1910.112 (Reserved) 1910.113 (Reserved) 1910.114 Additional delay in effective date 1910.115 Sources of standards 1910.116 Standards organizations Subpart I — Personal Protective Equipment 1910.132 General requirements 1910.133 Eye and face protection 1910.135 Occupational head protection 1910.136 Occupational foot protection 1910.137 Electrical protective devices 1910.138 Additional delay in effective date 1910.139 Sources of standards 1910.140 Standards organizations Subpart J — General Environmental Controls 1910.141 Sanitation 1910.142 Temporary labor camps 1910.143 Non water carriage disposal systems 1910.144 Safety color code for marking physical hazards 1910.145 Specifications for accident prevention signs and tags 1910.146 (Reserved) 1910.147 Sources of standards 1910.148 Standards organizations Subpart K — Medical and First Aid 1910.151 Medical services and first aid 1910.152 (Reserved) 1910.153 Sources of standards Subpart L — Fire Protection 1910.156 Definitions applicable to this subpart PORTABLE FIRE SUPPRESSION EQUIPMENT 1910.157 Portable fire extinguishers 1910.158 Standpipe and hose systems FIXED FIRE SUPPRESSION EQUIPMENT 1910.159 Automatic sprinkler systems 1910.160 Fixed dry chemical extinguishing systems 1910.161 Carbon dioxide extinguishing systems 1910.162 (Reserved) OTHER FIRE PROTECTION SYSTEMS 1910.163 Local fire alarm signaling systems 1910.164 Fire brigades (Reserved) 1910.165 Additional delay in effective date 1910.165a Sources of standards 1910.165b Standards organizations Subpart M — Compressed Gas and Compressed Air Equipment 1910.166 Inspection of compressed gas cylinders 1910.167 Safety relief devices for compressed gas cylinders 1910.168 Safety relief devices for cargo and portable tanks storing compressed gases 1910.169 Air receivers 1910.170 Sources of standards 1910.171 Standards organizations Subpart N — Materials Handling and Storage 1910.176 Handling materials—general 1910.177 Indoor general storage 1910.178 Powered industrial trucks 1910.179 Overhead and gantry cranes 1910.180 Crawler, locomotive and truck cranes 1910.181 Derricks 1910.182 Additional delay in effective date 1910.183 Sources of standards 1910.184 Standards organizations Subpart O — Machinery and Machine Guarding 1910.211 Definitions 1910.212 General requirements for all machines 1910.213 Woodworking machinery requirements 1910.214 Cooperage machinery 1910.215 Abrasive wheel machinery 1910.216 Mills and calendars in the rubber and plastics industries 1910.217 Mechanical power presses 1910.218 Forging machines 1910.219 Mechanical power-transmission apparatus 1910.220 Additional delay in effective date 1910.221 Sources of standards 1910.222 Standards organizations Subpart P — Hand and Portable Powered Tools and Other Hand-Held Equipment 1910.241 Definitions 1910.242 Hand and portable powered tools and equipment, general 1910.243 Guarding of portable powered tools 1910.244 Other portable tools and equipment 1910.245 Additional delay in effective date 1910.246 Sources of standards 1910.247 Standards organizations Subpart Q — Welding, Cutting and Brazing 1910.251 Definitions 1910.252 Welding, cutting and brazing, except: Subsection (c) (4) (i) Ventilation and flashguard Subsection (e) (2) Eye protection Subsection (f) Health protection and ventilation 1910.253 Sources of standards 1910.254 Standards organizations Subpart R — Special Industries 1910.261 Pulp, paper, and paperboard mills 1910.262 Textiles 1910.263 Bakery equipment 1910.264 Laundry machinery and operations 1910.265 Sawmills 1910.266 Pulpwood logging 1910.267 Agricultural operations 1910.268 Sources of standards 1910.269 Standards organizations Subpart S — Electrical 1910.308 Application 1910.309 National Electrical Code