Identification

(a) Signs or lettering, other than required or permitted by this regulation shall not appear on the front, back, or sides of the bus including any form of advertising other than the manufacturer's logo. (b) The wording "No Standees" and the seating capacity shall be displayed in black on the body to the left of the service door in letters not less than two (2) inches high. The owner's name shall be displayed on both sides in black letters no less than four (4) inches or more than six (6) inches high. The words "School Bus" shall be displayed in black on the front and rear of the bus in letters at least eight inches (8 inches) in height and conforming to "Series B" of the standard alphabets for highway and such words shall be placed as high as practicable, be on a reflective yellow or backlighted background, and be plainly legible. Lettering to identify fuel type shall be displayed in two (2) inch letters adjacent to fuel filler opening. Lettering to identify location of batteries shall be displayed in two (2) inches letters near battery compartment. DOT markings, when required, shall be displayed and comply with FMCSR 390.21. (c) The following means of identification may be displayed on the bus in black. 1. Company number on the front, rear, and sides of the bus in figures not to exceed six (6) inches in height. 2. The trip number in figures not to exceed eight (8) inches in height. 3. Lettering to identify emergency fuel shut off for a PFG fueled vehicle. (d) Manufacturer's emblems – Manufacturer's emblems limited to seventy-two (72) square inches may be displayed on the rear of the vehicle (except bumper), to the left of the service entrance below window line and above floor level rail. A hood emblem may be located on the face of the grill but not to protrude above the highest point of the hood. Model designation emblems limited to thirty-six (36) square inches may appear on cowl or side of hood on both sides.