Object marker design (Repealed)

When obstructions within or adjacent to the roadway require marking, the marker shall consist of an arrangement of one or more of the following designs: Type 1--Either a marker consisting of nine yellow reflectors, each with a minimum dimension of approximately 3", mounted symmetrically on an 18" yellow or black diamond panel, or an all yellow reflective diamond panel of the same size. Type 1 markers may be larger if conditions warrant. Type 2--Either a marker consisting of three yellow reflectors, each with a minimum dimension of approximately 3", arranged either horizontally or vertically on a white panel; or an all yellow reflective panel, 6" x 12". Type 2 markers may be larger if conditions warrant. Type 3--Striped marker consisting of a vertical rectangle approximately 1 foot by 3 feet in size with alternating black and reflectorized yellow stripes sloping downward at an angle of 45 toward the side of the obstruction on which traffic is to pass. The minimum width of the yellow stripe shall be 3 inches. A better appearance can be achieved if the black stripes are wider than the yellow stripes.