599. DEFINITIONS AND ABBREVIATIONS

599 DEFINITIONS AND ABBREVIATIONS 599.1 The meanings ascribed to the definitions and abbreviations appearing in §§ 199.1 and 199.2 respectively of Chapter 1 shall apply to the terms and abbreviations in this chapter. APPENDIX 5-1 TEST METHODS FOR SOURCES OF VOLATILE ORGANIC COMPOUNDS Source Category EPA Document No. Control Option Test Method1 Bulk gasoline terminals EPA-450/2-77-026 Add-on2 Methods 25A, 25B, 2A, 2B Leak tests per methods in EPA-450/2-78-051 Bulk plants EPA-450/2-77-035 Vapor balance system3 equipment specifications and operating procedures Equipment inspection per methods in EPA-450/2-77-035, page 6-3 Cutback asphalt EPA-450/2-77-037 Water emulsion Emulsion solvent content Direct observation by inspector ASTM Distillation Test D-244 Degreasing Not Applicable Low volatility VOC solvents Low or no VOC content solvents ASTM Method D-2879-86 Method 24 Degreasing EPA-450/2-77-022 Equipment specifications and operating procedures Per methods in EPA-450/2-77-022, pages 3-31, 3-33, 3-35, and 7-1 to 7-7 Add-on2 External floating roof tanks EPA-450/2-78-047 Inspection, maintenance and monitoring Per methods in EPA-450/2-78-047, pages 5-1 to 5-4 Fixed-roof tanks EPA-450/2-77-036 Internal floating roof4 equipment specifications and maintenance requirements Per methods in EPA-450/2-77-036, page 6-2 Add-on2 Method 25 Gasoline tank trucks EPA-450/2-78-051 Pressure-vacuum test Inspection, maintenance and monitoring Method 27 or methods in EPA-450/2-78-051, Appendix B Leak tests per methods in EPA-450/2-78-051 Appendix B Graphic arts: rotogravure and flexography EPA-450/2-78-033 Low solvent inks, high solids inks Method 24 or 24A Add on2 Method 25 Graphic Arts: Offset Lithography Not Applicable Add-on2 Low volatility VOC cleaning solutions Low VOC content cleaning solutions Dampening solution Method 25 or 25A ASTM Method D-2879-86 Method 24 Method 415.1 Manufacture of high density polyethylene, polypropylene and polystyrene EPA-450/3-83-008 Add on2 Method 18, 25 or 25A Natural gas/gasoline processing plants EPA-450/3-83-007 Inspection, maintenance and monitoring Method 21 Petroleum dry cleaners EPA-450/3-82-009 Operation and maintenance Per methods in EPA-450/3-82-009, Appendix E Add-on2 Method 25 Petroleum refinery equipment leaks EPA-450/2-78-036 Inspection, maintenance and monitoring Method 21 Petroleum refinery vacuum producing systems, wastewater separators and process unit turnarounds EPA-450/2-77-025 Equipment specifications and operating procedures Per methods in EPA-450/2-77-025, page 6-2 Perchloroethylene dry cleaners EPA-450/2-78-050 Operation and maintenance Per methods in EPA-450/2-78-050, pages 6-1 to 6-4 Add-on2 Pharmaceutical manufacture EPA-450/2-78-029 Operation and maintenance Per methods in EPA-450/2-78-029, page 7-2 Add-on2 Method 25 Rubber tire manufacture EPA-450/2-78-030 Add-on2 Method 25 Service stations-Stage I Design criteria document Vapor balance system3 equipment specifications operating and procedures Equipment inspection per methods in Design Criteria Document, pages 3 to 6 Leak tests per methods in EPA-450/2-78-051 Surface coating of cans, metal coils, paper, fabric, and automobiles and light-duty trucks EPA-450/2-77-008 Low solvent coatings Method 24 Add-on2 Method 25 or methods in EPA-450/2-78-041 Surface coating of flatwood paneling EPA-450/2-78-032 Low solvent coatings Method 24 or methods in EPA-450/2-78-032, page 5-1 Add-on2 Method 25 Surface coating of large appliances EPA-450/2-77-034 Low solvent coatings Method 24 or methods in EPA-450/2-77-034 pages 5-1 to 5-4 Add-on2 Method 25 or methods in EPA-450/2-78-041 Surface coating of magnetic wire EPA-450/2-77-033 Add-on2 Method 25 or methods in EPA-450/2-78-041 Surface coating of metal furniture EPA-450/2-77-032 Low solvent coatings Method 24 or methods in EPA-450/2-77-032, pages 5-1 to 5-5 Add-on2 Method 25 or methods in EPA-450/2-78-041 Surface coating of miscellaneous metal parts and products EPA-450/2-78-015 Low solvent coatings Method 24 or methods in EPA-450/2-78-015, page 6-1 Add-on2 Method 25 Synthetic organic chemicals manufacturing industry (SOCMI) equipment leaks EPA-450/3-83-006 Inspection, maintenance and monitoring Method 21 Synthetic organic chemicals manufacturing industry (SOCMI) air oxidation unit processes Add-on2 Method 18 Volatile organic liquid storage vessels Inspection, maintenance and monitoring 1Methods refer to those found in Appendix A to Part 60 of Title 40 of the Code of Federal Regulations unless otherwise noted. 2Add-on refers to emission control equipment, e.g. incineration, carbon adsorption, refrigeration, refrigeration/compression/absorption, etc. 3Visual inspection except for leaks. 4Visual inspections only. SOURCE: Section 2 of the Air Pollution Control Act of 1984 National Ambient Air Quality Standards Attainment Amendment Act of 1993, D.C. Law 10-24, 40 DCR 5474, 5479 (July 30, 1993); as amended by Final Rulemaking published at 45 DCR 7037 (October 2, 1998).