402. DENSITY - FLOOR AREA RATIO (FAR) (HE)

DENSITY – FLOOR AREA RATIO (FAR) (HE) The maximum permitted FAR of buildings in HE zones shall be given in the following table: TABLE K § 402.1: MAXIMUM PERMITTED FAR HE Sub-district Maximum FAR HE-1 (19th St.) 3.0 HE-2 (20th St.) 4.8 HE-3 (Water St.) 7.2 HE-4 (Corrections) 6.0 Square E (Park) 0.2 The following density limitations on non-residential uses apply within the HE zones, but only in the squares listed below: TABLE K § 402.2: MAXIMUM FAR FOR NON-RESIDENTIAL USES Square Maximum Non-residential FAR F 0.8 G 1.0 H 0.5 I 3.0 The matter-of-right FAR shall serve as the maximum permitted height and floor area ratio for a planned unit development (PUD). The minimum lot area for row dwellings shall be eighteen hundred square feet (1,800 sq. ft.) with a minimum lot width of eighteen feet (18 ft.). SOURCE: Final Rulemaking published at 63 DCR 2447, 3176 (March 4, 2016 – Part 2). District of Columbia Municipal Regulations Zoning Regulations of 2016: Special Purpose Zones 11-K DCMR § 402