Federal (United States) · Regulations

Subpart WWWW — National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production

51 sections

40 C.F.R. § 63.5780What is the purpose of this subpart?
40 C.F.R. § 63.5785Am I subject to this subpart?
40 C.F.R. § 63.5787What if I also manufacture fiberglass boats or boat parts?
40 C.F.R. § 63.5790What parts of my plant does this subpart cover?
40 C.F.R. § 63.5795How do I know if my reinforced plastic composites production facility is a new affected source or an existing affected source?
40 C.F.R. § 63.5796What are the organic HAP emissions factor equations in Table 1 to this subpart, and how are they used in this subpart?
40 C.F.R. § 63.5797How do I determine the organic HAP content of my resins and gel coats?
40 C.F.R. § 63.5798What if I want to use, or I manufacture, an application technology (new or existing) whose organic HAP emissions characteristics are not represented by the equations in Table 1 to this subpart?
40 C.F.R. § 63.5799How do I calculate my facility's organic HAP emissions on a tpy basis for purposes of determining which paragraphs of § 63.5805 apply?
40 C.F.R. § 63.5800When do I have to comply with this subpart?
40 C.F.R. § 63.5805What standards must I meet to comply with this subpart?
40 C.F.R. § 63.5810What are my options for meeting the standards for open molding and centrifugal casting operations at new and existing sources?
40 C.F.R. § 63.5820What are my options for meeting the standards for continuous lamination/casting operations?
40 C.F.R. § 63.5830What are my options for meeting the standards for pultrusion operations subject to the 60 weight percent organic HAP emissions reductions requirement?
40 C.F.R. § 63.5835What are my general requirements for complying with this subpart?
40 C.F.R. § 63.5840By what date must I conduct a performance test or other initial compliance demonstration?
40 C.F.R. § 63.5845When must I conduct subsequent performance tests?
40 C.F.R. § 63.5850How do I conduct performance tests, performance evaluations, and design evaluations?
40 C.F.R. § 63.5855What are my monitor installation and operation requirements?
40 C.F.R. § 63.5860How do I demonstrate initial compliance with the standards?
40 C.F.R. § 63.5865What data must I generate to demonstrate compliance with the standards for continuous lamination/casting operations?
40 C.F.R. § 63.5870How do I calculate annual uncontrolled and controlled organic HAP emissions from my wet-out area(s) and from my oven(s) for continuous lamination/casting operations?
40 C.F.R. § 63.5875How do I determine the capture efficiency of the enclosure on my wet-out area and the capture efficiency of my oven(s) for continuous lamination/casting operations?
40 C.F.R. § 63.5880How do I determine how much neat resin plus is applied to the line and how much neat gel coat plus is applied to the line for continuous lamination/casting operations?
40 C.F.R. § 63.5885How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting operations?
40 C.F.R. § 63.5890How do I calculate an organic HAP emissions factor to demonstrate compliance for continuous lamination/casting operations?
40 C.F.R. § 63.5895How do I monitor and collect data to demonstrate continuous compliance?
40 C.F.R. § 63.5900How do I demonstrate continuous compliance with the standards?
40 C.F.R. § 63.5905What notifications must I submit and when?
40 C.F.R. § 63.5910What reports must I submit and when?
40 C.F.R. § 63.5915What records must I keep?
40 C.F.R. § 63.5920In what form and how long must I keep my records?
40 C.F.R. § 63.5925What parts of the General Provisions apply to me?
40 C.F.R. § 63.5930Who implements and enforces this subpart?
40 C.F.R. § 63.5935What definitions apply to this subpart?
40 C.F.R. Appendix A to Subpart WWWW of Part 63Test Method for Determining Vapor Suppressant Effectiveness
40 C.F.R. Table 1 to Subpart WWWW of Part 63Equations To Calculate Organic HAP Emissions Factors for Specific Open Molding and Centrifugal Casting Process Streams
40 C.F.R. Table 2 to Subpart WWWW of Part 63Compliance Dates for New and Existing Reinforced Plastic Composites Facilities
40 C.F.R. Table 3 to Subpart WWWW of Part 63Organic HAP Emissions Limits for Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and Existing Centrifugal Casting and Continuous Lamination/Casting Sources that Emit Less Than 100 TPY of HAP
40 C.F.R. Table 4 to Subpart WWWW of Part 63Work Practice Standards
40 C.F.R. Table 5 to Subpart WWWW of Part 63Alternative Organic HAP Emissions Limits for Open Molding, Centrifugal Casting, and SMC Manufacturing Operations Where the Standards Are Based on a 95 Percent Reduction Requirement
40 C.F.R. Table 6 to Subpart WWWW of Part 63Basic Requirements for Performance Tests, Performance Evaluations, and Design Evaluations for New and Existing Sources Using Add-On Control Devices
40 C.F.R. Table 7 to Subpart WWWW of Part 63Options Allowing Use of the Same Resin Across Different Operations That Use the Same Resin Type
40 C.F.R. Table 8 to Subpart WWWW of Part 63Initial Compliance With Organic HAP Emissions Limits
40 C.F.R. Table 9 to Subpart WWWW of Part 63Initial Compliance With Work Practice Standards
40 C.F.R. Table 10 to Subpart WWWW of Part 63Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying With a Percent Reduction Limit on a Per Line Basis
40 C.F.R. Table 11 to Subpart WWWW of Part 63Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis
40 C.F.R. Table 12 to Subpart WWWW of Part 63Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying With a Lbs/Ton Organic HAP Emissions Limit on a Per Line Basis
40 C.F.R. Table 13 to Subpart WWWW of Part 63Applicability and Timing of Notifications
40 C.F.R. Table 14 to Subpart WWWW of Part 63Requirements for Reports
40 C.F.R. Table 15 to Subpart WWWW of Part 63Applicability of General Provisions (Subpart A) to Subpart WWWW of Part 63