Transient Duty Cycles

(a) This appendix specifies transient test intervals and duty cycles for the engine and powertrain testing described in §§ 1036.512 and 1036.514, as follows: (1) The transient test intervals and duty cycle for testing engines involves a schedule of normalized engine speed and torque values. (2) The transient test intervals and duty cycles for powertrain testing involves a schedule of vehicle speeds and road grade. Determine road grade at each point based on the peak rated power of the powertrain system, P rated, determined in § 1036.520 and road grade coefficients using the following equation: Road grade = a · P 2 rated + b · P rated + c (3) The operating schedules in this appendix in some cases eliminate repetitive information by omitting 1 Hz records where there is no change in values. Perform testing by continuing to operate at the last specified values until the operating schedule shows a change in values. The official operating schedule for testing, cycle validation, and other purposes includes both the specified and omitted values. (b) The following transient test interval applies for spark-ignition engines and powertrains when testing over the duty cycle specified in § 1036.512: Table 1 of Appendix B—Transient Test Interval for Spark-Ignition Engines and Powertrains Under § 1036.512 (c) The following transient test interval applies for compression-ignition engines and powertrains when testing over the duty cycle specified in § 1036.512: Table 2 of Appendix B—Transient Test Interval for Compression-Ignition Engines and Powertrains Under § 1036.512 (d) The following transient duty cycle applies for compression-ignition engines and powertrains when testing under § 1036.514: Table 3 of Appendix B—Transient Duty Cycle for Compression-Ignition Engines and Powertrains Under § 1036.514