Continuous Compliance With the Emission Limits for Tire Cord Production Affected Sources

As stated in § 63.6006, you must show continuous compliance with the emission limits for tire cord production affected sources according to the following table: For . . . For the following emission limit . . . You must demonstrate continuous compliance by . . . 1. Sources complying with the monthly average compliance alternative without using an add-on control device according to § 63.5987(a) In table 2 to this subpart a. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in table 2 to this subpart, option 1, determined according to the applicable procedures in § 63.5997(a) and (b)(1) and (2). b. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in table 2 to this subpart, option 2, determined according to the applicable procedures in § 63.5997(a) and (c)(1) and (2). 2. Sources complying with the monthly average compliance alternative using an add-on control device according to § 63.5987(b) In table 2 to this subpart a. Demonstrating that the monthly average HAP emissions for each monthly operating period do not exceed the emission limits in table 2 to this subpart, option 1, determined according to the applicable procedures in § 63.5997(a), (b)(1) and (3) through (4), and (d) through (f). b. Demonstrating that the monthly HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in table 2 to this subpart, option 2, determined according to the applicable procedures in § 63.5997(c)(1) and (3) through (4), and (d) through (f).