WATCHES AND WATCH COMPONENTS.

SEC. 1713. WATCHES AND WATCH COMPONENTS. Headnote 4 of subpart E of part 2 of schedule 7 is amended to read as follows: “4. Special Marking Requirements: Any movement or case provided for in this subpart, whether imported separately or attached to any article provided for in this subpart, shall not be permitted to be entered unless conspicuously and indelibly marked by cutting, 102 STAT. 1275die-sinking, engraving, stamping, or mold-marking (either indented or raised), as specified below: “(a) Watch movements shall be marked on one or more of the bridges or top plates to show— “(i) the name of the country of manufacture; “(ii) the name of the manufacturer or purchaser; and “(iii) in words, the number of jewels, if any, serving a mechanical purpose as frictional bearings. “(b) Clock movements shall be marked on the most visible part of the front or back plate to show— “(i) the name of the country of manufacture; “(ii) the name of the manufacturer or purchaser; and “(iii) the number of jewels, if any. “(c) Watch cases shall be marked on the inside or outside of the back case to show— “(i) the name of the country of manufacture; and “(ii) the name of the manufacturer or purchaser. “(d) Clock cases provided for in this subpart shall be marked on the most visible part of the outside of the back to show the name of the country of manufacture.”.