61G15-32.001. General Responsibility

CHAPTER 61G15-32 RESPONSIBILITY RULES OF PROFESSIONAL ENGINEERS CONCERNING THE DESIGN OF FIRE PROTECTION SYSTEMS 61G15-32.001 General Responsibility 61G15-32.002 Definitions 61G15-32.003 Common Requirements to All Fire Protection System Engineering Documents 61G15-32.004 Design of Water Based Fire Protection Systems 61G15-32.005 Design of Gas Agent Fire Suppression Systems 61G15-32.006 Design of Foam and Foam Water Fire Suppression Systems 61G15-32.007 Design of Dry Chemical and Miscellaneous Fire Suppression or Control Systems 61G15-32.008 Design of Fire Alarms, Signaling Systems, and Control Systems. 61G15-32.009 Design of Fine Water Spray (Mist) Fire Suppression and Control Systems 61G15-32.010 Design of Smoke Control Systems 61G15-32.001 General Responsibility. Fire protection engineering documents shall be prepared in accordance with applicable technology and the requirements of the authority having jurisdiction. The documents shall identify the Engineer of Record for the project. Both the Engineer of Record for the fire protection system and the delegated engineer, if utilized, shall comply with the requirements of the general responsibility rules, Chapter 61G15-30, F.A.C., and with the requirements of the more specific rules contained herein. The Engineer of Record for the Fire Protection System(s) shall provide design requirements in writing to the delegated engineer if one is used and shall review the design documents of the delegated engineer for conformance with his written instructions in accordance with Rule 61G15-30.005, F.A.C. Any Fire Protection Delegated Engineering Documents must be included in the final set of documents filed for permit.