61-30.803. Standards of Practice, Electrical Systems

(1) Electrical systems and components include the following: (a) Service entrance conductors, drip loop, cables, and raceways; (b) Main service equipment and main disconnects; (c) Service grounding; (d) Interior components of main service panels and sub panels; (e) Conductors; (f) Over current protection devices; (g) Readily accessible installed lighting fixtures, switches, and receptacles; (h) Ground fault circuit interrupters; (i) Amperage and voltage rating of electrical service; (j) Main disconnect(s); (k) Methods or types of wiring; (l) Smoke detectors; (m) Carbon monoxide detectors; (n) Arc fault circuit interrupters. (2) The inspector shall inspect all of the visible and readily accessible electrical systems and components. (3) The inspector is not required to inspect: (a) Remote control devices; (b) Security alarm systems and components; (c) Low voltage wiring, systems and components, ancillary wiring and systems and components not a part of the primary electrical power distribution system; (d) Generators, photovoltaic solar collectors or battery or electrical storage devices and associated equipment. (4) The inspector is not required to: (a) Measure amperage, voltage or impedance; (b) Perform a load calculation; (c) Insert any tool, probe, or device into any electrical component; (d) Determine the accuracy of circuit labeling.