62-625.880. Tables

(1) Selected industrial subcategories considered dilute for purposes of the combined waste stream formula. (a) Auto and Other Laundries: Carpet and Upholstery Cleaning Coin-Operated Laundries and Dry Cleaning Diaper Services Dry Cleaning Plants except Rug Cleaning Industrial Laundries Laundry and Garment Services, Not Elsewhere Classified Linen Supply Power Laundries, Family and Commercial. (b) Electrical and Electronic Components: Capacitors (Fluid Fill) Carbon and Graphite Products Dry Transformers Ferrite Electronic Devices Fixed Capacitors Fluorescent Lamps Fuel Cells Incandescent Lamps Magnetic Coatings Mica Paper Dielectric Motors, Generators, Alternators Receiving and Transmitting Tubes Resistance Heaters Resistors Switchgear Transformer (Fluid Fill). (c) Metal Molding and Casting: Nickel Casting Tin Casting Titanium Casting. (d) Gum and Wood Chemicals: Char and Charcoal Briquettes. (e) Inorganic Chemicals Manufacturing: Ammonium Chloride Ammonium Hydroxide Barium Carbonate Calcium Carbonate Carbon Dioxide Carbon Monoxide and By-product Hydrogen Hydrochloric Acid Hydrogen Peroxide (Organic Process) Nitric Acid Oxygen and Nitrogen Potassium Iodide Sodium Chloride (Brine Mining Process) Sodium Hydrosulfide Sodium Hydrosulfite Sodium Metal Sodium Silicate Sodium Thiosulfate Sulfur Dioxide Sulfuric Acid. (f) Leather: Gloves Luggage. (g) Paving and Roofing: Asphalt Concrete Asphalt Emulsion Linoleum Printed Asphalt Felt Roofing. (h) Pulp, Paper, and Paperboard, and Builders’ Paper and Board Mills: Groundwood-Chemi-Mechanical. (i) Rubber Manufacturing: Tire and Inner Tube Plants Emulsion Crumb Rubber Solution Crumb Rubber Latex Rubber Small-sized General Molded, Extruded and Fabricated Rubber Plants Medium-sized General Molded, Extruded and Fabricated Rubber Plants Large-sized General Molded, Extruded and Fabricated Rubber Plants Wet Digestion Reclaimed Rubber Pan, Dry Digestion, and Mechanical Reclaimed Rubber Latex Dipped, Latex-Extruded, and Latex-Molded Rubber Latex Foam. (j) Soap and Detergent Manufacturing: Soap Manufacture by Batch Kettle Fatty Acid Manufacture by Fat Splitting Soap Manufacture by Fatty Acid Neutralization Glycerin Concentration Glycerin Distillation Manufacture of Soap Flakes and Powders Manufacture of Bar Soaps Manufacture of Liquid Soaps Manufacture of Spray Dried Detergents Manufacture of Liquid Detergents Manufacture of Dry Blended Detergents Manufacture of Drum Dried Detergents Manufacture of Detergent Bars and Cakes. (k) Textile Mills: Apparel Manufacturing Cordage and Twine Padding and Upholstery Filling. (l) Timber Products Processing: Barking Process Finishing Processes Hardboard-Dry Process. (m) Footnotes. The exemption for the manufacture of products in the Electrical and Electronic Components Category is for operations not covered by Electroplating/Metal Finishing pretreatment regulations. Except for production attributed to lead-sheathed hose manufacturing operations. Except for production attributed to chromic acid form-cleaning operations. Except for production that generates zinc as a pollutant in discharge. (2) Regulated pollutants eligible for a removal credit. Biosolids Use or Disposal Practice Pollutant Land Application (mg/Kg) Surface Disposal (mg/Kg) Arsenic 75 73 Cadmium – 85 Chromium – 600 Copper 4300 – Lead 840 – Mercury 57 – Molybdenum 75 – Nickel 420 420 Selenium 100 – Zinc 7500 – (3) The following organic pollutants are eligible for a removal credit if the requirements for total hydrocarbons (or carbon monoxide) in Chapter 62-296, F.A.C., are met when sewage sludge is fired in a sewage sludge incinerator: Acrylonitrile, Aldrin/Dieldrin (total), Benzene, Benzidine, Benzo(a)pyrene, Bis(2-chloroethyl)ether, Bis(2-ethylhexyl)phthalate, Bromodichloromethane, Bromoethane, Bromoform, Carbon tetrachloride, Chlordane, Chloroform, Chloromethane, DDD, DDE, DDT, Dibromochloromethane, Dibutyl phthalate, 1,2-dichloroethane, 1,1-dichloroethylene, 2,4-dichlorophenol, 1,3-dichloropropene, Diethyl phthalate, 2,4-dinitrophenol, 1,2-diphenylhydrazine, Di-n-butyl phthalate, Endosulfan, Endrin, Ethylbenzene, Heptachlor, Heptachlor epoxide, Hexachlorobutadiene, Alphahexachlorocyclohexane, Betahexachlorocyclohexane, Hexachlorocyclopentadiene, Hexachloroethane, Hydrogen cyanide, Isophorone, Lindane, Methylene chloride, Nitrobenzene, N-Nitrosodimethylamine, N-Nitrosodi-n-propylamine, Pentachlorophenol, Phenol, Polychlorinated biphenyls, 2,3,7,8-tetrachlorodibenzo-p-dioxin, 1,1,2,2-tetrachloroethane, Tetrachloroethylene, Toluene, Toxaphene, Trichloroethylene, 1,2, 4-Trichlorobenzene, 1,1,1-Trichloroethane, 1,1,2-Trichloroethane, and 2,4,6-Trichlorophenol. (4) Additional pollutants eligible for a removal credit. Biosolids Use or Disposal Practice Surface Disposal Pollutant LA UL L I Arsenic – – 100(1) – Aldrin/Dieldrin (Total) 2.7 – – – Benzene 16(1) 140 3400 – Benzo(a)pyrene 15 100(1) 100(1) – Bis(2-ethylhexyl)phthalate – 100(1) 100(1) – Cadmium – 100(1) 100(1) – Chlordane 86 100(1) 100(1) – Chromium (Total) 100 – 100(1) – Copper – 46(1) 100(1) 1400 DDD, DDE, DDT (Total) 1.2 2000 2000 – 2,4-Dichlorophenoxy-aceti – 7 7 – Fluoride 730 – – – Heptachlor 7.4 – – – Hexachlorobenzene 29 – – – Hexachlorobutadiene 600 – – – Iron 78(1) – – – Lead – 100(1) 100(1) – Lindane 84 28(1) 28(1) – Malathion – 0.63 0.63 – Mercury – 100(1) 100(1) – Molybdenim – 40 40 – Nickel – – 100(1) – N-Nitrosodimethylamine 2.1 0.088 0.088 – Pentachlorophenol 30 – – – Phenol – 82 82 – Polychlorinated biphenyls 4.6 <50 <50 – Selenium – 4.8 4.8 4.8 Toxaphene 10 26(1) 26(1) – Trichloroethene 10(1) 9500 10(1) – Zinc – 4500 4500 4500 (a) Table abbreviations. 1. “LA” means land application. 2. “SD” means surface disposal. 3. “UL” means a disposal site without a liner and leachate collection system. 4. “L” means a disposal site with a liner and leachate collection system. 5. “I” means incineration. (b) Footnotes. The subsection (1), above, table indicates that the units are grams per kilograms – dry weight basis. All other values have the units milligrams per kilogram – dry weight basis.