HAR §19-104-21
HAR §19-104-21. Legal limitations
Length: 319 wordsOfficial source
Cite as Haw. Code R. § 19-104-21
(a) The total gross weight imposed on the road surface by any group of two or more consecutive axles on a vehicle or combination of vehicles shall not exceed the following when the distance between the first and last axles of the group under consideration is:
(1) Less than 42 inches . . . . . . 24,000 pounds
(2) 42 inches but less than 6 feet 34,000 pounds
(3) 6 feet and over . . . . . . . . W = 500(LN/N-1 + 12N+36)
(A) This applies to interstate highways;
(B) "W" = maximum weight in pounds carried on any group of two or more axles computed to the nearest 500 pounds;
(C) "L" = distance in feet between the extremes of any group of two or more consecutive axles, to the nearest foot; and
(D) "N" = number of axles in group under consideration;
provided that 2 consecutive sets of tandem axles may carry a gross load of 34,000 pounds each providing the overall distance between the first and last axles of such consecutive sets of tandem axles is 36 feet or more and provided the overall gross weight does not exceed 80,800 pounds.
(4) 6 feet and over . . . . . . . . W = 880(L+40)
(A) This applies to non-interstate highways;
(B) "W" = maximum weight in pounds rounded to the nearest 500 pounds; and
(C) "L" = distance in feet between first and last axles of the vehicle or combination of vehicles.
(b) No vehicle or combination of vehicles shall be used or operated on any state highway with a load upon any single or tandem axle or combination of axles which exceeds the carrying capacity of the axles specified by the manufacturer, or with a total weight in excess of its designed capacity as indicated by its designed gross vehicle weights or gross combination weights.
104-15
n 2