HAR §19-143-8
HAR §19-143-8. §19-143-8 Equipment
Length: 560 wordsOfficial source
Cite as Haw. Code R. § 19-143-8
(a) To comply with federal standards, all school bus equipment and supplies shall meet the following minimum FMVSS. This requirement shall also apply to vehicles converted for school bus use and school bus equipment and supplies purchased prior to the adoption of the applicable standards.
Federal Motor Vehicle
| Safety Standard | Title |
| --- | --- |
| 101 | Control Location, Identification and Illumination |
| 102 | Transmission Shift Lever Sequence, Starter Interlock, and Transmission Braking Effect |
| 103 | Windshield Defrosting and Defogging Systems |
| 104 | Windshield Wiping and Washing Systems |
| 105 | Hydraulic Braking Systems |
| 106 | Brake Hoses |
| 107 | Reflecting Surfaces |
| 108 | Lamps, Reflective Devices and Associated Equipment |
| 111 | Rearview Mirrors |
| 113 | Hood Latch Systems |
| 116 | Motor Vehicle Brake Fluids |
| 119 | New Pneumatic Tires for Vehicles Other than Passenger Cars |
| 120 | Tire Selection and Rims for Motor Vehicles Other than Passenger Cars |
| 121 | Air Brake System |
| 124 | Accelerator Control Systems |
| 125 | Reflectors Used to Indicate Vehicles Stalled on the Highways |
| 201 | Occupant Protection |
| 203 | Impact Protection for the Drivers |
| 204 | Steering Control Rearward Displacement |
| 205 | Glazing Materials |
| 206 | Door Locks and Door Retention Components |
143-7
§19-143-8
Federal Motor Vehicle
Safety Standard
Title
| 207 | Seating System |
| --- | --- |
| 208 | Occupant Crash Protection |
| 209 | Seat Belt Assemblies |
| 210 | Seat Belt Assembly Anchorages |
| 213 | Child Seating Systems |
| 217 | Bus Window Retention and Release |
| 219 | Windshield Zone Intrusion |
| 220 | School Bus Rollover Protection |
| 221 | School Bus Body Joint Strength |
| 222 | School Bus Passenger Seating and Crash Protection |
| 301 | Fuel System Integrity |
| 302 | Flammability of Interior Materials |
(Type III school bus shall not be required to meet FMVSS 220, 221, and 222.)
(b) All school buses shall have the parts and accessories necessary for safe operation as described in General Order No. 2, Sections 390.41, 393.82a, 393.94, and 396.06.
(c) All school buses shall have the following parts and accessories for safe operation as described in chapter 19-141, motor carrier safety regulations, Sections 393.11, 393.12, 393.19, 393.20, 393.22, 393.24, 393.25, 393.26, 393.27, 393.28, 393.29, 393.30, 393.31, 393.40, 393.41, 393.42, 393.44, 393.45, 393.46, 393.47, 393.48, 393.49, 393.50, 393.51, 393.52, 393.60, 393.61, 393.62, 393.63, 393.65, 393.67, 393.69, 393.75, 393.78, 393.80, 393.81, 393.82, 393.83, 393.84, 393.88, 393.89, 393.94, and 393.95.
(d) Modifications of any vehicle shall have prior approval of the department.
(e) All school buses shall carry a removable first aid kit in an observable and accessible place. The following items shall constitute the minimum contents of the first aid kit:
(1) 1 x 36-inch x 26-inch absorbant gauze;
(2) 1 x 1/2 inch x 2-1/2 yards tape;
(3) 1 triangular bandage;
(4) 1 x 3-inch compress;
(5) 1 antiseptic swabs;
(6) 1 stock - 16 unit 1-inch x 3-inch bandages;
(7) 1 x 1-inch roller gauze;
(8) 5 clean wipes; and
(9) 1 pair of scissors.
143-8