HAR §11-37-62
HAR §11-37-62. Sanitary operations
Cite as Haw. Code R. § 11-37-62
(a)
General maintenance. Buildings, fixtures, and other
physical facilities shall be maintained in a clean and
sanitary condition and shall be kept in repair
adequate to prevent crude extract or manufactured hemp
products from becoming adulterated. Cleaning and
sanitizing of utensils and equipment shall be
conducted in a manner that protects against allergen
cross-contact and against contamination of crude
extract, manufactured hemp products, components,
contact surfaces, or packaging materials.
(b) Substances used in cleaning and sanitizing;
storage of toxic materials.
(1) Cleaning compounds and sanitizing agents
used in cleaning and sanitizing procedures
shall be free from undesirable
microorganisms and shall be safe and
adequate under the conditions of use.
Compliance with this requirement may be
verified by any effective means, including
purchase of these substances under a letter
of guarantee or certification or examination
of these substances for contamination. Only
the following toxic materials may be used or
stored in a facility where hemp biomass is
37-64
6 2 2
§11-37-62
processed or crude extract, manufactured hemp products, or components are exposed:
(A) Those required to maintain clean and sanitary conditions;
(B) Those necessary for use in laboratory testing procedures;
(C) Those necessary for facility and equipment maintenance and operation; and
(D) Those necessary for use in the facility's operations.
(2) Toxic cleaning compounds, sanitizing agents, and pesticide chemicals shall be identified, held, and stored in a manner that protects against contamination of crude extract, manufactured hemp products, components, contact surfaces, or packaging materials.
(c) Pest control. Pests shall not be allowed in any area of a facility. Guard, guide, or pest-detecting dogs may be allowed in some areas of a facility if the presence of the dogs is unlikely to result in contamination of crude extract, manufactured hemp products, components, contact surfaces, or packaging materials. Effective measures shall be taken to exclude pests from the manufacturing, processing, packing, and holding areas and to protect against the contamination of crude extract, manufactured hemp products, or components on the premises by pests. The use of pesticides to control pests in the facility is permitted only under precautions and restrictions that will protect against the contamination of crude extract, manufactured hemp products, components, contact surfaces, and packaging materials.
(d) Sanitation of contact surfaces. All contact surfaces, including utensils and contact surfaces of equipment, shall be cleaned as frequently as necessary to protect against allergen cross-contact and against contamination of crude extract, manufactured hemp products, or components.
(1) Contact surfaces used for manufacturing, processing, packing, or holding low-moisture crude extract, manufactured hemp products,
37-65
3622
§11-37-62
or components shall be in a clean, dry,
sanitary condition before use. When the
surfaces are wet-cleaned, they shall, when
necessary, be sanitized and thoroughly dried
before subsequent use.
(2) In wet processing, when cleaning is
necessary to protect against allergen cross-
contact or the introduction of
microorganisms into crude extract,
manufactured hemp products, or components,
all contact surfaces shall be cleaned and
sanitized before use and after any
interruption during which the contact
surfaces may have become contaminated. Where
equipment and utensils are used in a
continuous production operation, the
utensils and contact surfaces of the
equipment shall be cleaned and sanitized as
necessary.
(3) Single-service articles (such as utensils
intended for one-time use, paper cups, and
paper towels) shall be stored, handled, and
disposed of in a manner that protects
against allergen cross-contact and against
contamination of crude extract, manufactured
hemp products, components, contact surfaces,
or packaging materials.
(e) Sanitation of non-contact surfaces. Non-
contact surfaces of equipment used in the operation of
a facility shall be cleaned in a manner and as
frequently as necessary to protect against allergen
cross-contact and against contamination of crude
extract, manufactured hemp products, components,
contact surfaces, and packaging materials.
(f) Storage and handling of cleaned portable
equipment and utensils. Cleaned and sanitized portable
equipment with contact surfaces and utensils shall be
stored in a location and manner that protects contact
surfaces from allergen cross-contact and from
contamination. [Eff 8/9/21; am and comp 2/24/22; comp
4/29/22; am and comp 12/6/24; comp JAN 28 2025 ]
(Auth: HRS §328G-4) (Imp: HRS §328G-4)
37-66
3622