HAR §11-850-113. contamination of cannabis, manufactured cannabis products, or components

(1) Contact surfaces used for producing and storing cannabis or low-moisture manufactured cannabis products or components shall be in a clean, dry, sanitary condition before use. When the surfaces are wet-cleaned, they shall, when necessary, be sanitized and thoroughly dried before subsequent use. (2) In wet processing, when cleaning is necessary to protect against allergen cross-contact or the introduction of microorganisms into cannabis, manufactured cannabis products, or components, all contact surfaces shall be cleaned and sanitized before use and after any interruption during which the contact surfaces may have become contaminated. Where equipment and utensils are used in a continuous production operation, the utensils and contact surfaces of the equipment shall be cleaned and sanitized as necessary. (3) Single-service articles (such as utensils intended for one-time use, paper cups, and paper towels) shall be stored, handled, and disposed of in a manner that protects against allergen cross-contact and against contamination of cannabis, manufactured cannabis products, components, contact surfaces, or packaging materials. (e) Sanitation of non-contact surfaces. Non-contact surfaces of equipment used in the operation of a production center shall be cleaned in a manner and as frequently as necessary to protect against allergen cross-contact and against contamination of cannabis, manufactured cannabis products, components, contact surfaces, and packaging materials. (f) Storage and handling of cleaned portable equipment and utensils. Cleaned and sanitized portable equipment with contact surfaces and utensils shall be 850-82 3611