HAR §12-220-6. Re-installed pressure retaining items

(a) If a pressure retaining item is removed from its original site and is to be re-installed at the same location, or at a new location, the contractor, user, or owner must apply to the department for a permit for installation before re-installing the pressure retaining item. The fittings and appurtenances must comply with the requirements for the installation of a new pressure retaining item. (b) If a standard pressure retaining item is to be moved to another state for temporary use or repair, the owner of the pressure retaining item or his or her agent must apply to the department for approval to re-install the pressure retaining item within this State. [Eff 12/6/82; am, ren §12-220-6, and comp 12/6/90; am 7/6/98; am and comp 12/21/19; comp SEP - 3 2024 ] (Auth: HRS §397-4) (Imp: HRS §397-4) ### §12-220-7 Working pressure for existing installations. Subject to approval by the department, any inspector may decrease the working pressure on any existing installation if the condition of the pressure retaining item warrants. If the owner or user does not concur with the inspector's decision, the owner or user may appeal to the director pursuant to section 12-220-33.1. [Eff 12/6/82; am, ren §12-220-7, and comp 12/6/90; am 7/6/98; am and comp 12/21/19; 220-18 355 §12-220-7 comp SEP - 3 2024 ] (Auth: HRS §397-4) (Imp: HRS §397-4) #