Biodiesel

Identification and labeling requirements for biodiesel. (3-15-22) 01. Identification of Product. Biodiesel and biodiesel blends must be identified by the capital letter B followed by the numerical value representing the volume percentage of biodiesel fuel. (Examples: B10, B20, B100). (3-15-22) 02. Labeling of Retail Dispensers. Each retail dispenser of biodiesel or biodiesel blend containin g more than five percent (5%) must be labeled with the capital letter B followed by the numerical value representing th e volume percentage of biodiesel fuel and ending with the either “biodiesel” or “biodiesel blend.” (Examples: B1 0 biodiesel, B20 biodiesel blend). (3-15-22) a. The label must have letters in bold face block not less than one-half (1/2) inch high, with th e lettering clearly legible on a contrasting background. (3-15-22) b. The label must be displayed on both faces of the dispenser on the upper one-half (1/2) of the dispenser as near the unit price display as practical. (3-15-22) 03. Documentation for Dispenser Labeling Purposes. (3-15-22) a. The retailer must be provided a declaration of the volume percent of the biodiesel on an invoice , bill of lading, shipping paper, or other document, at the time of delivery of the fuel. (3-15-22) b. This documentation is for dispenser labeling purposes only; it is the responsibility of any potentia l blender to determine the amount of biodiesel in the diesel fuel prior to blending. (3-15-22) 04. Exemption. Biodiesel blends containing five percent (5%) or less biodiesel by volume ar e exempted from the requirements of Section 351 of this rule. (3-15-22) 352. -- 399. (RESERVED)