Specific Permit Conditions

01. Basis. Conditions necessary for the protection of the environment and the public health may differ from facility to facility because of varying environmental conditions and animal waste compositions. The Director may establish, on a case-by-case basis, specific permit conditions considering characteristics specific to a facility and inherent hazards of those characteristics, including, but not limited to: (3-24-22) a. Chemical, biological, physical, and volumetric characteristics of the process wastewater; (3-24-22) b. Geological and climatic nature of the facility site; (3-24-22) c. Size of the site and its proximity to population centers and to ground and surface water; (3-24-22) d. Legal considerations relative to land use and water rights; (3-24-22) e. Techniques used in process wastewater distribution and the disposition of that vegetation exposed to process wastewaters; and (3-24-22) f. The need for monitoring and record keeping to determine if the facility is operated in conformance with its design and if its design is adequate to protect the environment and the public health. (3-24-22) 02. Limitations to Operation. Conditions of the permit may specify or limit: (3-24-22) a. Process wastewater composition; (3-24-22) b. Method, manner and frequency of process wastewater treatment; (3-24-22) c. Physical, chemical and biological characteristics of a facility; (3-24-22) d. An odor management plan; and (3-24-22) e. Any other condition the Director finds necessary to protect public health or the environment. (3-24-22) 03. Compliance Schedules. The Director may establish a compliance schedule for facilities as part of the permit conditions including: (3-24-22) a. Specific steps or actions to be taken by the permittee to achieve compliance with the permit or these rules; and (3-24-22) b. Dates by which those steps or actions are to be taken. (3-24-22) 04. Monitoring. Any facility may be subject to monitoring including, but not limited to: (3-24-22) a. The type, installation, use and maintenance of monitoring equipment; (3-24-22) b. Monitoring or sampling methodology, frequency and locations; (3-24-22) IDAHO ADMINISTRATIVE CODE IDAPA 58.01.09 Department of Environmental Quality Rules Regulating Swine Facilities Section 500 Page 12 c. Monitored substances or parameters; (3-24-22) d. Testing and analytical procedures; and (3-24-22) e. Reporting requirements including both frequency and form. (3-24-22) 451. -- 499. (RESERVED)