35 Ill. Adm. Code 214.162
Combination of Fuels
Section 214
Section
214.162 Combination of Fuels
a) No person shall cause or allow the emission of sulfur dioxide
into the atmosphere in any one hour period from any fuel combustion emission
source burning simultaneously any combination of solid, liquid and gaseous
fuels to exceed the allowable emission rate determined by the following
equation:
E
=
S
S
H
S
+ S
d
H
d
+ S
R
H
R
b) Symbols in the equation mean the following:
E
=
allowable
sulfur dioxide emission rate;
S
S
=
solid fuel
sulfur dioxide emission standard which is applicable;
S
d
=
distillate
oil sulfur dioxide emission standard determined from the table in subsection
(d);
S
R
=
residual
fuel oil sulfur dioxide emission standard;
H
S
=
actual heat
input from solid fuel;
H
d
=
actual heat
input from distillate fuel oil;
H
R
=
actual heat
input from residual fuel oil.
c) That portion of the actual heat input that is derived:
1) From the burning of gaseous fuels produced by the gasification
of solid fuels shall be included in H
S
;
2) From the burning of gaseous fuels produced by the gasification
of distillate fuel oil shall be included in H
d
;
3) From the burning of gaseous fuels produced by the gasification
of residual fuel oil shall be included in H
R
;
4) From the burning of gaseous fuels produced by the gasification
of any other liquid fuel shall be included in H
R
; and
5) From the burning of by-product gases such as those produced
from a blast furnace or a catalyst regeneration unit in a petroleum refinery
shall be included in H
R
.
d) Metric or English units may be used in the equation of
subsection (a) as follows:
Parameter
Metric
English
E
kg/hr
lbs/hr
S
S
,
S
R
kg/MW-hr
lbs/mmBtu
S
d
prior to January
1, 2017
0.46 kg/MW-hr
0.3 lbs/mmBtu
S
d
on and after
January 1, 2017
0.0023 kg/MW-hr
0.0015 lb/mmBtu
H
S
, H
d
,
H
R
MW
mmBtu