35 Ill. Adm. Code 214.562
Coffeen Generating Station
Section 214
Section 214.562 Coffeen
Generating Station
a) The emission standards of this subsection shall apply only if
the requirements of subsections (b), (c), and (d) are fulfilled.
Notwithstanding any other limitation contained in this Part, whenever the coal
burned is mined exclusively from the mine that is presently known as Monterey
Coal Company's No. 1 Mine located south of Carlinville, emission of sulfur
dioxide from Units 1 and 2 at the Central Illinois Public Service Company's
(CIPS) Coffeen Generating Station (Coffeen), located in Montgomery County, shall
not exceed either of the following emission standards:
1) 29,572 kilograms of sulfur dioxide in any one hour (65,194
lbs/hr); and
2) 11.29 kilograms of sulfur dioxide per megawatt-hour of heat
input (7.29 lbs/mmbtu).
b) CIPS shall conduct an ambient sulfur dioxide monitoring and
dispersion modeling program designed to demonstrate that the emission standards
of subsection (a) will not cause or contribute to violations of any applicable
primary or secondary sulfur dioxide ambient air quality standard as set forth
in Section 243.122. Such ambient monitoring and dispersion modeling program
shall be operated for at least one year commencing no later than 6 months after
Coffeen is legally able and begins to operate at an emission rate greater than
55,555 pounds of sulfur dioxide per hour.
c) No more than 15 months after the commencement of the ambient
monitoring and dispersion modeling program of subsection (b), CIPS shall apply
for a new operating permit. CIPS shall submit to the Environmental Protection
Agency (Agency), at the time of the application, a report containing the
results of the ambient monitoring and dispersion modeling program of subsection
(b) and the results of all relevant stack tests conducted prior to the report's
submission.
d) No later than six months after Coffeen is legally able and
begins to operate at an emission rate greater than 55,555 pounds of sulfur
dioxide per hour, a stack test shall be conducted in accordance with Section
214.101(a), in order to determine compliance with emission standards set forth
in subsection (a). After the stack test is conducted, the results shall be
submitted to the Agency within 90 days. The requirements of this subsection do
not preclude the Agency from requiring additional stack tests.