35 Ill. Adm. Code 217.408
Reporting
Section 217
Section 217.408 Reporting
a) By May 31, 2004, or within one year after initial startup,
whichever occurs later, the owner or operator of a kiln subject to the
requirements of this Subpart must submit to the Agency an initial compliance
certification for each kiln subject to the requirements of Section 217.402 of
this Subpart. This certification must contain the following information as
applicable:
1) The identity and type of each kiln subject to this Subpart,
the name and address of the plant where the kiln is located, and the name and
telephone number of the person responsible for demonstrating compliance with
this Subpart;
2) A demonstration that each kiln is in compliance with Section
217.402 of this Subpart, identifying the provision with which it is complying
and is accompanied by a summary of the approved compliance method, e.g.,
performance test for the kiln and other supporting data being relied upon by
the owner or operator;
3) If demonstrating compliance by use of a low-NO
x
burner
or mid-kiln firing system pursuant to Section 217.402(a)(1) of this Subpart, a
copy of the manufacturer's recommended maintenance and schedule for maintenance
as approved by the Agency;
4) If demonstrating compliance pursuant to Section
217.402(a)(3)(C) or (a)(5) of this Subpart, the date on which the permit
containing the emission reduction plan or SIP revision was received as
federally enforceable conditions; and
5) If demonstrating compliance pursuant to Section 217.402(a)(6)
of this Subpart, the date of issuance and the identification of the permit
authorizing, through federally enforceable conditions, participation in the
federal NO
x
Trading Program.
b) Beginning in 2004, by December 31 of each year, owners and
operators complying with this Subpart pursuant to Section 217.402(a)(1), (a)(2),
(a)(3), (a)(4), or (a)(5) must, as a seasonal component of its annual emission
report pursuant to 35 Ill. Adm. Code 254, report the total NO
x
emissions
of each subject kiln during the control period of each year to the Agency, if
the kiln operated during this period.