35 Ill. Adm. Code 219.405
Lithographic Printing: Applicability
Section 219
Section 219.405
Lithographic Printing: Applicability
a) Every owner or operator of lithographic printing lines is
subject to the recordkeeping and reporting requirements in Section 219.411 of
this Subpart.
b) Prior to August 1, 2010, Sections 219.407 through 219.410 of
this Subpart shall apply to:
1) All owners or operators of heatset web offset lithographic printing
lines unless:
A) Total maximum theoretical emissions of VOM from all heatset web
offset lithographic printing lines (including solvents used for cleanup
operations associated with heatset web offset lithographic printing lines) at
the source never exceed 90.7 Mg (100 tons) per calendar year before the
application of capture systems and control devices. To determine a source's
total maximum theoretical emissions of VOM for the purposes of this subsection
(b)(1)(A), the owner or operator shall use the calculations set forth in
Section 219.411(a)(1)(C) of this Subpart; or
B) Federally enforceable permit conditions or SIP revision for all
heatset web offset lithographic printing lines at the source requires the owner
or operator to limit production or capacity of these printing lines to total
VOM emissions of 90.7 Mg/yr (100 TPY) or less, before the application of
capture systems and control devices;
2) All owners or operators of lithographic printing lines, unless
the combined emissions of VOM from all lithographic printing lines at the
source (including solvents used for cleanup operations associated with the
lithographic printing lines never exceed 45.5 kg/day (100 lbs/day), as
determined in accordance with Section 219.411(a)(1)(B), before the application
of capture systems and control devices.
c) On and after August 1,
2010:
1) The
requirements in Section 219.407(a)(1)(B) through (a)(1)(E) and 219.407(b) and
all applicable provisions in Sections 219.409 through 219.411 of this Subpart
shall apply to all owners or operators of heatset web offset lithographic
printing lines, if the combined emissions of VOM from all lithographic printing
lines at the source (including solvents used for cleanup operations associated
with the lithographic printing lines) ever exceed 45.5 kg/day (100 lbs/day),
calculated in accordance with Section 219.411(b)(2)(B), before the application
of capture systems and control devices;
2) The
requirements in Section 219.407(a)(1)(A) and (a)(2) through (a)(5) and all
applicable provisions in Sections 219.409 through 219.411 of this Subpart shall
apply to all owners or operators of lithographic printing lines if the combined
emissions of VOM from all lithographic printing lines at the source (including
solvents used for cleanup operations associated with the lithographic printing
lines) ever equal or exceed 6.8 kg/day (15 lbs/day), calculated in accordance
with Section 219.411(b)(1)(B), before the application of capture systems and
control devices;
3) Notwithstanding
subsection (c)(2) of this Section, at sources where the combined emissions of
VOM from all lithographic printing lines at the source (including solvents used
for cleanup operations associated with the lithographic printing lines) equal
or exceed 6.8 kg/day (15 lbs/day) but do not exceed 45.5 kg/day (100 lbs/day),
calculated in accordance with Section 219.411(b)(1)(B), before the application
of capture systems and control devices, the following exclusions shall apply
unless the owner or operator of the source certifies pursuant to Section
219.411(g)(1)(B) that the source will not make use of any such exclusions:
A) The
requirements of Section 219.407(a)(1)(A), (a)(2), and (a)(3) of this Subpart
shall not apply to lithographic printing lines with a total fountain solution
reservoir of less than 3.8 liters (1 gallon);
B) The
requirements of Section 219.407(a)(3) of this Subpart shall not apply to
sheet-fed offset lithographic printing lines with maximum sheet size of 11x17
inches or smaller;
C) The
requirements of Section 219.407(a)(4) of this Subpart shall not apply to up to
a total of 416.3 liters (110 gallons) per year of cleaning materials used on
all lithographic printing lines at the source;
D) The requirements
of Section 219.407(a)(4)(A)(i) shall not apply to lithographic printing lines
at the source. Instead, the requirements of Section 219.407(a)(4)(A)(ii) shall
apply to such lines.
d) If a lithographic printing line at a source is or becomes subject
to one or more of the limitations in Section 219.407 of this Subpart, the
lithographic printing lines at the source are always subject to the applicable
provisions of this Subpart.