35 Ill. Adm. Code 702.101
Purpose, Scope, and Applicability
Section 702
Section 702.101 Purpose, Scope, and Applicability
a) Coverage
1) The
permit regulations of 35 Ill. Adm. Code 702 through 705 include provisions for
the following two permit programs:
A) The
RCRA (Resource Conservation and Recovery Act) permit program pursuant to Title
V and Title X of the Environmental Protection Act.
B) The
UIC (Underground Injection Control) permit program pursuant to Title III and
Title X of the Environmental Protection Act.
2) The
regulations of 35 Ill. Adm. Code 702 through 705 cover basic permitting
requirements (35 Ill. Adm. Code 702 through 704) and procedures for processing
of permit applications (35 Ill. Adm. Code 705) for the RCRA and UIC permit
programs.
3) The
regulations of 35 Ill. Adm. Code 702 through 705 are derived from 40 CFR 124,
144, and 270.
b) Structure
1) The
regulations of 35 Ill. Adm. Code 702 through 705 comprise the following four
Parts:
A) This
Part contains definitions applicable to 35 Ill. Adm. Code 702 through 705. It
also contains basic permitting requirements for the RCRA and UIC programs.
B) The
regulations of 35 Ill. Adm. Code 703 contain requirements specific to RCRA
permits. In case of inconsistency between 35 Ill. Adm. Code 702 and 703, 35
Ill. Adm. Code 703 will control.
C) The
regulations of 35 Ill. Adm. Code 704 contain requirements specific to UIC
permits. In case of inconsistency between 35 Ill. Adm. Code702 and 704, 35
Ill. Adm. Code 704 will control.
D) The
regulations of 35 Ill. Adm. Code 705 establish procedures for issuance of RCRA
and UIC permits by the Agency.
2) The
structure and coverage of 35 Ill. Adm. Code 702 through 704 are indicated in
the following table:
RCRA and UIC
Subpart of
35 Ill. Adm. Code
702
RCRA
Subpart of
35 Ill. Adm. Code
703
UIC
Subpart of
35 Ill. Adm. Code
704
General
A
A
A
Prohibitions
−
B
B
Authorization by Rule
−
C
C
Permit Application
B
D
D
Special Forms of
−
E
−
Permits
Permit Conditions
C
F
E
Issued Permits
D
−
H
Permit Modification
−
G
−
Remedial Action Plans
−
H
−
Integration with
−
I
−
MACT Standards
RCRA Standardized
−
J
−
Permits
Requirements
−
−
F
Applicable to
Hazardous Waste
Injection Wells
Financial Responsibilty
−
−
G
for Class I
Hazardous Waste
Injection Wells
Requirements
−
−
I
Applicable to Class
V Injection Wells
Requirements
−
−
J
Applicable to Class
VI Injection Wells
c) Relation to Other
Requirements
1) Permit
application forms. An applicant for a RCRA or UIC permit or a person seeking
interim status under RCRA must submit its application on an Agency permit
application form when such is available.
2) Technical
regulations. Each of the two permit programs that are covered in these permit
regulations has separate additional regulations that contain technical
requirements for that program. These separate regulations are used by the
Agency to determine the requirements that must be placed in any permit that it
issues. These separate regulations are located as follows:
RCRA
35 Ill. Adm. Code 724 and 726 through 728
UIC
35 Ill. Adm. Code 730 and 738
BOARD NOTE: Derived in
significant part from 40 CFR 144.1 and 270.1 (2017).