35 Ill. Adm. Code 703.209
Miscellaneous Units
Section 703
Section 703.209
Miscellaneous Units
Except as otherwise provided in
35 Ill. Adm. Code 724.700, the owner or operator of a facility that treats,
stores, or disposes of hazardous waste in miscellaneous units must provide the
following additional information in the Part B application:
a) A detailed description of the unit being used or proposed for
use, including the following:
1) Physical characteristics, materials of construction, and
dimensions of the unit;
2) Detailed plans and engineering reports describing how the unit
will be located, designed, constructed, operated, maintained, monitored,
inspected, and closed to comply with the requirements of 35 Ill. Adm. Code
724.701 and 724.702; and
3) For disposal units, a detailed description of the plans to
comply with the post-closure requirements of 35 Ill. Adm. Code 724.703;
b) Detailed hydrologic, geologic, and meteorologic assessments
and land-use maps for the region surrounding the site that address and ensure
compliance of the unit with each factor in the environmental performance
standards of 35 Ill. Adm. Code 724.701. Preliminary hydrologic, geologic, and
meteorologic assessments will suffice, unless the Agency notifies the applicant
that, based on the preliminary assessments, the unit will not conform with the
environmental performance standards of 35 Ill. Adm. Code 724.701. The Agency
must follow the procedures for incomplete applications in 35 Ill. Adm. Code
705.122;
c) Information on the potential pathways of exposure of humans or
environmental receptors to hazardous waste or hazardous constituents and on the
potential magnitude and nature of such exposures;
d) For any treatment unit, a report on a demonstration of the
effectiveness of the treatment based on laboratory or field data; and
e) Any additional information that the Agency determines is
necessary for evaluation of compliance of the unit with the environmental
performance standards of 35 Ill. Adm. Code 724.701.
BOARD NOTE: Derived from 40 CFR
270.23 (2002).