Reporting Requirements

Section 730 Section 730.169  Reporting Requirements Reporting requirements must, at a minimum, include the following: a)         Quarterly reports to the Agency containing the following information: 1)         The maximum injection pressure; 2)         A description of any event that exceeds operating parameters for annulus pressure or injection pressure as specified in the permit; 3)         A description of any event that triggers an alarm or shutdown device required pursuant to Section 730.167(f) and the response taken; 4)         The total volume of fluid injected; 5)         Any change in the annular fluid volume; 6)         The physical, chemical, and other relevant characteristics of injected fluids; and 7)         The results of monitoring prescribed pursuant to Section 730.168; and b)         Reporting, within 30 days or with the next quarterly report, whichever comes later, the results of any of the following activities: 1)         Periodic tests of mechanical integrity; 2)         Any other test of the injection well conducted by the permittee if required by permit condition; and 3)         Any well workover. BOARD NOTE:  Derived from 40 CFR 146.69 (2005).