675 IAC 20-2-5 Floor

Sec. 5. (a) All slopes shall be uniform. (b) The slope of the floor from the shallow end wall towards the deep end shall not exceed one (1) foot in twelve (12) feet to the point of the first slope change for Class A and B pools or one (1) foot in ten (10) feet for Class C pools. (c) The point of the first slope change shall be defined as the point at which the floor slope exceeds one (1) foot in twelve (12) feet for Class A and B pools or one (1) foot in ten (10) feet for Class C pools. (d) The slope of the floor from the point of the first slope change to the deep end shall not exceed one (1) foot in three (3) feet. Such slopes are not intended to provide any less water depth than those specified if the pool is intended for diving. (e) The transitional radius between the pool wall and floor shall be as follows: (1) The radius shall have its center no less than two (2) feet nine (9) inches below the waterline in deep areas or two (2) feet six (6) inches in the shallow area. (2) The radius shall be tangent to the wall. (3) The radius shall be at least equal to, or greater than, the depth of the pool minus the vertical wall depth measured at the waterline minus three (3) inches to allow draining to the main outlet.