675 IAC 29-2-2
675 IAC 29-2-2 ASCE/SEI 7-10; minimum design loads for buildings and other structures
Cite as Ind. Admin. Code tit. 675, r. 29-2-2
Sec. 2. (a) Section 1.2.1 of Chapter 1, as contained at pages 1-2; Chapter 26, as contained at pages 187-201; Chapter 29, as contained at
pages 249-255; Chapter 30, as contained at pages 257-297; and Chapter 31, as contained at page 299 of that certain document being titled ASCE/SEI
7-10 Minimum Design Loads for Buildings and Other Structures, Third Printing Errata Incorporated Includes Supplement 1, as published by the
American Society of Civil Engineers, 1801 Alexander Bell Dr., Reston, VA 20191, are hereby adopted by reference as if fully set out in this article
save and except those revisions made in this section.
(b) Section 1.2.1 of Chapter 1 is hereby amended as follows:
(1) The definition of "Authority Having Jurisdiction" is amended to read as follows: "Authority Having Jurisdiction" means the
inspection authority.
(2) The definition of "Other Structures" is amended to read as follows: "Other Structures" means outdoor event equipment as defined
in IC 22-12-1-17.7.
(3) The definition of "Temporary Facilities" is amended to read as follows: "Temporary Facilities" means temporary outdoor event
equipment, as defined in 675 IAC 29-1-2(a).
(c) Section 26.2 of Chapter 26 is hereby amended to delete the definition of "Approved" and substitute as follows: APPROVED as to
materials, equipment, design, and types of construction, means acceptance by the inspection authority by one (1) of the following methods:
(i) investigation or tests conducted by recognized authorities; or
(ii) investigation or tests conducted by technical or scientific organizations; or
(iii) accepted principles.
The investigation, tests, or principles shall establish that the materials, equipment, and types of construction are safe for their intended
purpose.
(d) The first sentence of Subsection 30.1.1 of Chapter 30 is hereby amended to read as follows: This chapter applies to the determination
of wind pressures on components and cladding (C&C) on buildings, which, for purposes of this Chapter, includes Other Structures.