675 IAC 30-6-1 Compliance with ASME B&PVC; special designs

Sec. 1. (a) No boiler, except an existing installation of a boiler to be reinstalled or one exempted by 675 IAC 30-1-2, shall be installed in this state on or after July 1, 1953, unless it conforms with the edition of the ASME B&PVC in effect when the boiler was designed or constructed. A boiler installed on or after January 5, 1996 that requires an ASME B&PVC manufacturer's data report shall be registered with the NBBI. (b) Each reinstalled or secondhand boiler shall be installed in accordance with the requirements of Part 1 of the NBIC, as referenced in 675 IAC 30-1-1. (c) Where a boiler of special design does not comply with the adopted standards in 675 IAC 30-1-1, its construction must be approved in accordance with the variance procedure established in IC 22-13-2-11. (d) A boiler shall not be operated until a valid operating permit is issued, as required by 675 IAC 30-3-9.