675 IAC 31-2-7 Standard guide for inspection of amusement rides and devices

Sec. 7. (a) That certain document being titled Standard Guide for Inspection of Amusement Rides and Devices, 2005 edition approved December 1, 2005 (ASTM F893-05a), published by ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428- 2959, is hereby adopted by reference as if fully set out in this article save and except those revisions made in this section. (b) Delete subsection 1.2 in its entirety. (c) Delete subsection 2 in its entirety. (d) Change subsection 4.1 to read as follows: The purpose of this guide is to delineate information and recommend inspections for amusement rides and devices between the manufacturer and owner, which inspections are not those required by 685 IAC 1-4-6 [675 IAC 31-4-6], 685 IAC 1-4-8 [675 IAC 31-4-8], and 685 IAC 1-4-11 [675 IAC 31-4-11] through 685 IAC 1-4-13 [675 IAC 31-4-13]. (e) In section 5.1, add a first sentence to read as follows: If a manufacturer has failed to perform the manufacturer's responsibilities, the failure may be a basis to not issue a regulated amusement device operating permit. (f) Notwithstanding language to the contrary in the primarily incorporated documents, the version of all secondarily incorporated documents, which are documents referred to in the primarily incorporated documents, shall be the version in effect on September 24, 2009.