312 IAC 13-8-4
312 IAC 13-8-4 Dewatering wells
Cite as Ind. Admin. Code tit. 312, r. 13-8-4
Sec. 4. (a) This section establishes standards for dewatering wells which are in addition to the general requirements for drilling a well under
this article.
(b) A dewatering well shall be equipped with casing having a nominal diameter of at least one and one-fourth (11/4) inches. The casing
shall be clean and free of grease, oil, or other contaminants that would impact water quality.
(c) Upon installation, a dewatering well must be fitted with a temporary cap which remains in place until pumping equipment is installed.
The cap shall be of a type that prevents vermin or other potential contaminants from entering the well.
(d) Earthen materials shall be placed around the well casing to drain surface water away from the dewatering well.