326 IAC 20-48-2 Alternative organic hazardous air pollutant content requirements for open molding gel coat operations

Sec. 2. In addition to alternative organic HAP content requirements for open molding resin operations contained in Table 2 to Subpart VVVV, 40 CFR 63*, the alternative HAP content requirements for gel coat operations are as follows: Gel Coat Application For this operation And this application method You must not exceed this weighted-average percent organic HAP content (weight percent) requirement Pigmented gel coat operations Atomized (spray) 33 percent Clear gel coat operations Atomized (spray) 48 percent Tooling gel coat operations Atomized (spray) 40 percent Pigmented gel coat operations Nonatomized (nonspray) 40 percent Clear gel coat operations Nonatomized (nonspray) 55 percent Tooling gel coat operations Nonatomized (nonspray) 54 percent *These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Indiana Government Center-North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.