326 IAC 6.8-1-1
326 IAC 6.8-1-1 Applicability
Cite as Ind. Admin. Code tit. 326, r. 6.8-1-1
Sec. 1. (a) Except as provided in subsections (b) and (c), sources or facilities located in Lake County shall comply with the following
emission limits and meet the requirements in 326 IAC 6.8-2, 326 IAC 6.8-4, 326 IAC 6.8-5, and 326
IAC 6.8-8 through 326 IAC 6.8-11:
(1) 326 IAC 6.8-4, 326 IAC 6.8-5, and 326 IAC 6.8-8 through 326 IAC 6.8-11
if the source or facility is specifically listed in 326 IAC 6.8-4, 326 IAC 6.8-5, and 326 IAC 6.8-8 through
326 IAC 6.8-11.
(2) Section 2 of this rule if the source or facility is not specifically listed but has:
(A) the potential to emit one hundred (100) tons or more; or
(B) actual emissions of ten (10) tons or more;
of particulate matter per year.
(b) Particulate limitations shall not be established for surface coating, reinforced plastic composites fabricating manufacturing processes,
and graphic arts manufacturing processes that use the following:
(1) Dip coating.
(2) Roll coating.
(3) Flow coating.
(4) Brush coating.
(5) Less than five (5) gallons of coating per day.
(c) If the limitations in this article conflict with or are inconsistent with limitations established in 326 IAC 12, then the more
stringent limitations shall apply.