326 IAC 8-1-11 Compliance certification, record keeping, and reporting requirements for certain coating facilities using daily-weighted averaging

Sec. 11. (a) This section applies to any owner or operator of a coating source that: (1) uses daily-weighted averaging on the coating facility to comply with volatile organic compound (VOC) emission limits; and (2) meets any of the applicability criteria that follow: (A) 326 IAC 8-5-5(a)(1); (B) 326 IAC 8-5-5(a)(2); or (C) 326 IAC 8-5-5(a)(3)(A). (b) Upon startup of a new coating facility, or upon changing the method of compliance for an existing coating facility from the use of compliant coatings or control devices to daily-weighted averaging, the owner or operator of a coating facility identified in subsection (a) shall certify to the department that the coating facility is in compliance with the requirements of this section. The certification shall include: (1) The name and location of the source. (2) The address and telephone number of the person responsible for the source. (3) Identification of each coating facility and identification of the applicable emission limitation. (4) The name and identification number of each coating facility that will comply by means of daily-weighted averaging. (5) The VOC content of each coating, as applied, each day for each coating facility, expressed in units necessary to determine compliance. (6) The instrument or method by which the owner or operator will accurately measure or calculate the VOC content of each coating and the volume of each coating, as applied, used each day at each coating facility. (7) The method by which the owner or operator will create and maintain records each day as required in subsection (c). (8) Calculation of the daily-weighted average for a day representative of current or projected maximum production levels. (9) The time at which the coating facility's day begins if a time other than midnight local time is used to define a day. (c) On and after May 1, 1997, or upon initial startup of a new coating facility, or upon changing the method of compliance for an existing coating facility from the use of compliant coatings or control devices to daily-weighted averaging, the owner or operator of a coating facility identified in subsection (a) shall for each coating facility and for each coating used collect and record each day, and maintain all of the following information: (1) The name and identification number of each coating, as applied. (2) The mass of VOC per volume (excluding water and exempt compounds) and the volume of each coating (excluding water and exempt compounds), as applied, or the VOC content and the volume of each coating, as applied, expressed in units necessary to determine compliance. (3) The daily-weighted average VOC content of all coatings, in each coating facility. (d) On and after May 1, 1997, the owner or operator of a coating facility identified in subsection (a) shall notify the department in either of the following instances: (1) Any record showing noncompliance with the applicable daily-weighted average requirements shall be reported by submitting a copy of the record to the department within thirty (30) days following noncompliance; such record shall also be submitted with the quarterly compliance report. The following information shall accompany each submittal: (A) Name and location of the coating facility. (B) Date and duration of the noncompliance. (C) Corrective action taken. (2) At least thirty (30) calendar days before changing the method of compliance from daily-weighted averaging to compliant coatings or control devices, the owner or operator shall comply with all requirements of section 10(b) or 12(b) of this rule, respectively. Upon changing the method of compliance from daily-weighted averaging to the use of compliant coatings or control devices, the owner or operator shall comply with all requirements of section 10 or 12 of this rule, respectively.