327 IAC 6.1-4-5 Nonsite-specific permits

Sec. 5. (a) For a biosolid to qualify under a nonsite-specific permit, the following criteria must be met: (1) Either of the pathogen requirements: (A) Class A in section 13(b) of this rule; or (B) Class B in section 13(c) of this rule. (2) Compliance with the vector attraction reduction requirements in section 15 of this rule. (3) The pollutant concentrations in Table 3 in section 9(c) of this rule must not be exceeded. (b) For an industrial waste product to qualify under a nonsite-specific permit, the pollutant concentrations in Table 3 in section 9(c) of this rule must not be exceeded. (c) A completed permit application must: (1) be submitted to the commissioner on forms and in a format prescribed by the commissioner; (2) include analytical data that demonstrates that pollutant concentrations do not exceed the limits in Table 3 in section 9(c) of this rule; (3) include the names of all counties in which the biosolid or industrial waste product will be applied; (4) for biosolid, provide the documentation of methods of pathogen reduction and vector attraction reduction as required by sections 13 and 15 of this rule; and (5) include any other information as may be required by the commissioner to ensure compliance with this article. (d) A person who prepares a biosolid or industrial waste product and that has a nonsite-specific permit shall: (1) comply with all permit conditions; (2) unless otherwise specified, comply with this rule; (3) only apply to agricultural land; (4) not apply a biosolid or industrial waste product within six hundred sixty (660) feet of any residence unless a signed waiver has been received from the owner and, if applicable, tenant of the residence; (5) not apply a biosolid or industrial waste product within six hundred sixty (660) feet of any public building or public or nonpublic school building; and (6) submit monthly reports in accordance with section 18 of this rule. (e) Waivers must be obtained from the residence owner and, if applicable, tenant of the residence: (1) for each year in which biosolid or industrial waste product is proposed to be applied at distances less than the setback distance in subsection (d)(4); and (2) prior to the application of the biosolid or industrial waste product at distances less than the setback distance in subsection (d)(4).