LAC 55:III.1109. Labeling

A. Each helmet shall be labeled permanently and legibly, in a manner such that the label(s) can be read easily without removing padding or any other permanent part, with the following: 1. manufacturer's name or identification; 2. precise model designation; 3. size; 4. month and year of manufacture. This may be spelled out (for example, June 1988), or expressed in numerals (for example, 6/88); 5. the symbol DOT, constituting the manufacturer's certification that the helmet conforms to the applicable federal motor vehicle safety standards. This symbol shall appear on the outer surface, in a color that contrasts with the background, in letters at least 3/8 inch (1 cm) high, centered laterally with the horizontal centerline of the symbol located a minimum of 1 1/8 inches (2.9 cm) and a maximum of 1 3/4 inches (3.5 cm) from the bottom edge of the posterior portion of the helmet; 6. instructions to the purchaser as follows: a. shell and liner constructed of [identify type(s) of materials]; b. helmet can be seriously damaged by some common substances without damage being visible to the user. Apply only the following: recommended cleaning agents, paint, adhesives, etc., as appropriate; c. make no modifications. Fasten helmet securely. If helmet experiences a severe blow, return it to the manufacturer for inspection, or destroy it and replace it; d. any additional relevant safety information should be applied at the time of purchase with an attached tag, brochure, or other suitable means.