LAC 33:III.2199. Appendix A and B

A. Appendix A An industry is considered a synthetic organic chemical manufacturing industry (SOCMI), as defined in LAC 33:III.111, if it produces, as intermediates or final products, one or more of the chemicals listed in the following table. Table 8 SOCMI Chemicals CAS Noa | Chemical 105-57-7 | Acetal 75-07-0 | Acetaldehyde 107-89-1 | Acetaldol 60-35-5 | Acetamide 103-84-4 | Acetanilide 64-19-7 | Acetic acid 108-24-7 | Acetic anhydride 67-64-1 | Acetone 75-86-5 | Acetone cyanohydrin 75-05-8 | Acetonitrile 98-86-2 | Acetophenone 75-36-5 | Acetyl chloride 74-86-2 | Acetylene 107-02-8 | Acrolein 79-06-1 | Acrylamide 79-10-7 | Acrylic acid 107-13-1 | Acrylonitrile 124-04-9 | Adipic acid 111-69-3 | Adiponitrile (b) | Alkyl naphthalenes 107-18-6 | Allyl alcohol 107-05-1 | Allyl chloride 1321-11-5 | Aminobenzoic acid 111-41-1 | Aminoethylethanolamine 123-30-8 | p-aminophenol 628-63-7, 123-92-2 | Amyl acetates 71-41-0c | Amyl alcohols 110-58-7 | Amyl amine 543-59-9 | Amyl chloride 110-66-7c | Amyl mercaptans 1322-06-1 | Amyl phenol 62-53-3 | Aniline 142-04-1 | Aniline hydrochloride 29191-52-4 | Anisidine 100-66-3 | Anisole 118-92-3 | Anthranilic acid 84-65-1 | Anthraquinone 100-52-7 | Benzaldehyde 55-21-0 | Benzamide 71-43-2 | Benzene 98-48-6 | Benzenedisulfonic acid 98-11-3 | Benzenesulfonic acid 134-81-6 | Benzil 76-93-7 | Benzilic acid 65-85-0 | Benzoic acid 119-53-9 | Benzoin 100-47-0 | Benzonitrile 119-61-9 | Benzophenone 98-07-7 | Benzotrichloride 98-88-4 | Benzoyl chloride 100-51-6 | Benzyl alcohol 100-46-9 | Benzylamine 120-51-4 | Benzyl benzoate 100-44-7 | Benzyl chloride 98-87-3 | Benzyl dichloride 92-52-4 | Biphenyl 80-05-7 | Bisphenol A 10-86-1 | Bromobenzene 27497-51-4 | Bromonaphthalene 106-99-0 | Butadiene 106-98-9 | 1-butene 123-86-4 | n-butyl acetate 141-32-2 | n-butyl acrylate 71-36-3 | n-butyl alcohol 78-92-2 | s-butyl alcohol 75-65-0 | t-butyl alcohol 109-73-9 | n-butylamine 13952-84-6 | s-butylamine 75-64-9 | t-butylamine 98-73-7 | p-tert-butyl benzoic acid 107-88-0 | 1,3-butylene glycol 123-72-8 | n-butyraldehyde 107-92-6 | Butyric acid 106-31-0 | Butyric anhydride 109-74-0 | Butyronitrile 105-60-2 | Caprolactam 75-1-50 | Carbon disulfide 558-13-4 | Carbon tetrabromide 56-23-5 | Carbon tetrachloride 9004-35-7 | Cellulose acetate 79-11-8 | Chloroacetic acid 108-42-9 | m-chloroaniline 95-51-2 | o-chloroaniline 106-47-8 | p-chloroaniline 35913-09-8 | Chlorobenzaldehyde 108-90-7 | Chlorobenzene 118-91-2, 535-80-8, 74-11-3c | Chlorobenzoic acid 2136-81-4, 2136-89-2, 5216-25-1c | Chlorobenzotrichloride 1321-03-5 | Chlorobenzoyl chloride 25497-29-4 | Chlorodifluoromethane 75-45-6 | Chlorodifluoroethane 67-66-3 | Chloroform 25586-43-0 | Chloronapthalene 88-73-3 | o-chloronitrobenzene 100-00-5 | p-chloronitrobenzene 25167-80-0 | Chlorophenols 126-99-8 | Chloroprene 7790-94-5 | Chlorosulfonic acid 108-41-8 | m-chlorotoluene 95-49-8 | o-chlorotoluene 106-43-4 | p-chlorotoluene 75-72-9 | Chlorotrifluoromethane 108-39-4 | m-cresol 95-48-7 | o-cresol 106-44-5 | p-cresol 1319-77-3 | Mixed cresols 1319-77-3 | Cresylic acid 4170-30-0 | Crotonaldehyde 3724-65-0 | Crotonic acid 98-82-8 | Cumene 80-15-9 | Cumene hydroperoxide 372-09-8 | Cyanoacetic acid 506-77-4 | Cyanogen chloride 108-80-5 | Cyanuric acid 108-77-0 | Cyanuric chloride 110-82-7 | Cyclohexane 108-93-0 | Cyclohexanol 108-94-1 | Cyclohexanone 110-83-8 | Cyclohexene 108-91-8 | Cyclohexylamine 111-78-4 | Cyclooctadiene 112-30-1 | Decanol 123-42-2 | Diacetone alcohol 27576-04-1 | Diaminobenzoic acid 95-76-1, 95-82-9, 554-00-7, 608-27-5, 608-31-1, 626-43-7, 27134-27-6, 57311-92-9c | Dichloroaniline 541-73-1 | m-dichlorobenzene 95-50-1 | o-dichlorobenzene 106-46-7 | p-dichlorobenzene 75-71-8 | Dichlorodifluoromethane 111-44-4 | Dichloroethyl ether 107-06-2 | 1,2-dichloroethane (EDC) 96-23-1 | Dichlorohydrin 26952-23-8 | Dichloropropene 101-83-7 | Dicyclohexylamine 109-89-7 | Diethylamine 111-46-6 | Diethylene glycol 112-36-7 | Diethylene glycol diethyl ether 111-96-6 | Diethylene glycol dimethyl ether 112-34-5 | Diethylene glycol monobutyl ether 124-17-7 | Diethylene glycol monobutyl ether acetate 111-90-0 | Diethylene glycol monoethyl ether 112-15-2 | Diethylene glycol monoethyl ether acetate 111-77-3 | Diethylene glycol monomethyl ether 64-67-5 | Diethyl sulfate 75-37-6 | Difluoroethane 25167-70-8 | Diisobutylene 26761-40-0 | Diisodecyl phthalate 27554-26-3 | Diisooctyl phthalate 674-82-8 | Diketene 124-40-3 | Dimethylamine 121-69-7 | N,N-dimethylaniline 115-10-6 | N,N-dimethyl ether 68-12-2 | N,N-dimethylformamide 57-14-7 | Dimethylhydrazine 77-78-1 | Dimethyl sulfate 75-18-3 | Dimethyl sulfide 67-68-5 | Dimethyl sulfoxide 120-61-6 | Dimethyl terephthalate 99-34-3 | 3,5-dinitrobenzoic acid 51-28-5 | Dinitrophenol 25321-14-6 | Dinitrotoluene 123-91-1 | Dioxane 646-06-0 | Dioxilane 122-39-4 | Diphenylamine 101-84-8 | Diphenyl oxide 102-08-9 | Diphenyl thiourea 25265-71-8 | Dipropylene glycol 25378-22-7 | Dodecene 28675-17-4 | Dodecylaniline 27193-86-8 | Dodecylphenol 106-89-8 | Epichlorohydrin 64-17-5 | Ethanol 141-43-5c | Ethanolamines 141-78-6 | Ethyl acetate 141-97-9 | Ethyl acetoacetate 140-88-5 | Ethyl acrylate 75-04-7 | Ethylamine 100-41-4 | Ethylbenzene 74-96-4 | Ethyl bromide 9004-57-3 | Ethylcellulose 75-00-3 | Ethyl chloride 105-39-5 | Ethyl chloroacetate 105-56-6 | Ethylcyanoacetate 74-85-1 | Ethylene 96-49-1 | Ethylene carbonate 107-07-3 | Ethylene chlorohydrin 107-15-3 | Ethylenediamine 106-93-4 | Ethylene dibromide 107-21-1 | Ethylene glycol 111-55-7 | Ethylene glycol diacetate 110-71-4 | Ethylene glycol dimethyl ether 111-76-2 | Ethylene glycol monobutyl ether 112-07-2 | Ethylene glycol monobutyl ether acetate 110-80-5 | Ethylene glycol monoethyl ether 111-15-9 | Ethylene glycol monoethyl ether acetate 109-86-4 | Ethylene glycol monomethyl ether 110-49-6 | Ethylene glycol monomethyl ether acetate 122-99-6 | Ethylene glycol monophenyl ether 2807-30-9 | Ethylene glycol monopropyl ether 75-21-8 | Ethylene oxide 60-29-7 | Ethyl ether 104-76-7 | 2-ethylhexanol 122-51-0 | Ethyl orthoformate 95-92-1 | Ethyl oxalate 41892-71-1 | Ethyl sodium oxalacetate 50-00-0 | Formaldehyde 75-12-7 | Formamide 64-18-6 | Formic acid 110-17-8 | Fumaric acid 98-01-1 | Furfural 56-81-5 | Glycerol 26545-73-7 | Glycerol dichlorohydrin 25791-96-2 | Glycerol triether 56-40-6 | Glycine 107-22-2 | Glyoxal 118-74-1 | Hexachlorobenzene 67-72-1 | Hexachloroethane 36653-82-4 | Hexadecyl alcohol 124-09-4 | Hexamethylenediamine 629-11-8 | Hexamethylene glycol 100-97-0 | Hexamethylenetetramine 74-90-8 | Hydrigen cyanide 123-31-9 | Hydroquinone 99-96-7 | p-hydroxybenzoic acid 26760-64-5 | Isoamylene 78-83-1 | Isobutanol 110-19-0 | Isobutyl acetate 115-11-7 | Isobutylene 78-84-2 | Isobutyraldehyde 79-31-2 | Isobutyric acid 25339-17-7 | Isodecanol 26952-21-6 | Isooctyl alcohol 78-78-4 | Isopentane 78-59-1 | Isophorone 121-91-5 | Isophthalic acid 78-79-5 | Isoprene 67-63-0 | Isopropanol 108-21-4 | Isopropyl acetate 75-31-0 | Isopropylamine 75-29-6 | Isopropyl chloride 25168-06-3 | Isopropylphenol 463-51-4 | Ketene (b) | Linear alkyl sulfonate 123-01-3 | Linear alkylbenzene (linear dodecylbenzene) 110-16-7 | Maleic acid 108-31-6 | Maleic anhydride 6915-15-7 | Malic acid 141-79-7 | Mesityl oxide 121-47-1 | Metanilic acid 79-41-4 | Methacrylic acid 563-47-3 | Methallyl chloride 67-56-1 | Methanol 79-20-9 | Methyl acetate 105-45-3 | Methyl acetoacetate 74-89-5 | Methylamine 100-61-8 | n-methylaniline 74-83-9 | Methyl bromide 37365-71-2 | Methyl butynol 74-87-3 | Methyl chloride 108-87-2 | Methylcyclohexane 1331-22-2 | Methylcyclohexanone 75-09-2 | Methylene chloride 101-77-9 | Methylene dianiline 101-68-8 | Methylene diphenyl diisocyanate 78-93-3 | Methyl ethyl ketone 107-31-3 | Methyl formate 108-11-2 | Methyl isobutyl carbinol 108-10-1 | Methyl isobutyl ketone 80-62-6 | Methyl methacrylate 77-75-8 | Methylpentynol 98-83-9 | a-methylstyrene 110-91-8 | Morpholine 85-47-2 | a-naphthalene sulfonic acid 120-18-3 | b-naphthalene sulfonic acid 90-15-3 | a-naphthol 135-19-3 | b-naphthol 75-98-9 | Neopentanoic acid 88-74-4 | o-nitroaniline 100-01-6 | p-nitroaniline 91-23-6 | o-nitroanisole 100-17-4 | p-nitroanisole 98-95-3 | Nitrobenzene 27178-83-2c | Nitrobenzoic acid (o, m, and p) 79-24-3 | Nitroethane 75-52-5 | Nitromethane 88-75-5 | 2-Nitrophenol 25322-01-4 | Nitropropane 1321-12-6 | Nitrotoluene 27215-95-8 | Nonene 25154-52-3 | Nonylphenol 27193-28-8 | Octylphenol 123-63-7 | Paraldehyde 115-77-5 | Pentaerythritol 109-66-0 | n-pentane 109-67-1 | 1-pentene 127-18-4 | Perchloroethylene 594-42-3 | Perchloromethyl mercaptan 94-70-2 | o-phenetidine ]156-43-4 | p-phenetidine 108-95-2 | Phenol 98-67-9, 585-38-6, 609-46-1, 1333-39-7c | Phenolsulfonic acids 91-40-7 | Phenyl anthranilic acid (b) | Phenylenediamine 75-44-5 | Phosgene 85-44-9 | Phthalic anhydride 85-41-6 | Phthalimide 108-99-6 | b-picoline 110-85-0 | Piperazine 9003-29-6, 25036-29-7c | Polybutenes 25322-68-3 | Polyethylene glycol 25322-69-4 | Polypropylene glycol 123-38-6 | Propional dehyde 79-09-4 | Propionic acid 71-23-8 | n-propyl alcohol 107-10-8 | Propylamine 540-54-5 | Propyl chloride 115-07-1 | Propylene 127-00-4 | Propylene chlorohydrin 78-87-5 | Propylene dichloride 57-55-6 | Propylene glycol 75-56-9 | Propylene oxide 110-86-1 | Pyridine 106-51-4 | Quinone 108-46-3 | Resorcinol 27138-57-4 | Resorcylic acid 69-72-7 | Salicylic acid 127-09-3 | Sodium acetate 532-32-1 | Sodium benzoate 9004-32-4 | Sodium carboxymethyl cellulose 3926-62-3 | Sodium chloroacetate 141-53-7 | Sodium formate 139-02-6 | Sodium phenate 110-44-1 | Sorbic acid 100-42-5 | Styrene 110-15-6 | Succinic acid 110-61-2 | Succinonitrile 121-57-3 | Sulfanilic acid 126-33-0 | Sulfolane 1401-55-4 | Tannic acid 100-21-0 | Terephthalic acid 79-34-5c | Tetrachloroethanes 117-08-8 | Tetrachlorophthalic anhydride 78-00-2 | Tetraethyl lead 119-64-2 | Tetrahydronapthalene 85-43-8 | Tetrahydrophthalic anhydride 75-74-1 | Tetramethyl lead 110-60-1 | Tetramethylenediamine 110-18-9 | Tetramethylethylenediamine 108-88-3 | Toluene 95-80-7 | Toluene-2,4-diamine 584-84-9 | Toluene-2,4-diisocyanate 26471-62-5 | Toluene diisocyanates (mixture) 1333-07-9 | Toluenesulfonamide 104-15-4c | Toluenesulfonic acids 98-59-9 | Toluenesulfonyl chloride 26915-12-8 | Toluidines 87-61-6, 108-70-3, 120-82-1c | Trichlorobenzenes 71-55-6 | 1,1,1-trichloroethane 79-00-5 | 1,1,2-trichloroethane 79-01-6 | Trichloroethylene 75-69-4 | Trichlorofluoromethane 96-18-4 | 1,2,3-trichloropropane 76-13-1 | 1,1,2-trichloro-1,2,2-trifluoroethane 121-44-8 | Triethylamine 112-27-6 | Triethylene glycol 112-49-2 | Triethylene glycol dimethyl ether 7756-94-7 | Triisobutylene 75-50-3 | Trimethylamine 108-05-4 | Vinyl acetate 75-01-4 | Vinyl chloride 75-35-4 | Vinylidene chloride 25013-15-4 | Vinyl toluene 1330-20-7 | Xylenes (mixed) 956-47-6 | o-xylene 106-42-3 | p-xylene 1300-71-6 | Xylenol 1300-73-8 | Xylidine a CAS numbers refer to the Chemical Abstracts Registry numbers assigned to specific chemicals, isomers, or mixtures or chemicals. Some isomers or mixtures that are covered by the standards do not have CAS numbers assigned to them. The standards apply to all of the chemicals listed, whether CAS numbers have been assigned or not. b No CAS number(s) have been assigned to this chemical, its isomers, or mixtures containing these chemicals. c CAS numbers for some of the isomers are listed; the standards apply to all of the isomers and mixtures, even if CAS numbers have not been assigned. B. Appendix B, Louisiana Consolidated Fugitive Emissions Program (LCFEP) Through a memorandum of understanding signed in 1996, the Louisiana Department of Environmental Quality (LDEQ) entered into an agreement with the U.S. Environmental Protection Agency (EPA) Region 6 to administer a program titled the Louisiana Consolidated Fugitive Emissions Program (LCFEP). The agreement established guidelines for the consolidation of multiple leak detection and repair (LDAR) programs at industrial facilities into a single program. At facilities that are subject to multiple LDAR standards, LCFEP provides the option of consulting a prioritized stringency table of programs in order to determine the overall most stringent program applicable to the facility, and then administer that program solely in lieu of implementing all fugitive programs simultaneously. Under the current agreements between EPA and LDEQ, and between LDEQ and individual facilities, participating industry conducts the most stringent LDAR program and submits a single report, greatly reducing the regulatory burden created by overlapping state and federal LDAR programs. The governing memorandum of understanding states: State and EPA Region 6 agree to implement and enforce fugitive emission program requirements in accordance with the Louisiana Fugitive Emission Program Consolidation Guidelines to provide a mechanism for consolidating overlapping state and federal equipment leak programs in agreement with the affected source. EPA Region 6 and the State accept federal and state enforceability of the consolidated program. The State and EPA Region 6 further agree that compliance with a consolidated program in accordance with the Guidelines will be considered compliance with each of the fugitive emission programs being consolidated. Furthermore, it is understood that an affected source’s noncompliance with the consolidated program requirements may subject the affected source to enforcement action for one or more of the requirements of fugitive emissions programs being consolidated. This agreement will be implemented only through a Source Notice and Agreement signed by and specific to each affected source. If in the future, a new federal standard is promulgated (i.e., consolidated air rule, MACT, etc.) that could potentially change the established Guidelines, the Guidelines will be revisited and modified as necessary. The Source Notice and Agreement (SNA) is a memorandum submitted by an interested facility which contains a detailed list of programs to be consolidated. Consolidation is done on either a unit-by-unit or a facility-wide basis. The SNA is required to be signed by a facility representative meeting EPA’s responsible official designation, defined under 40 CFR 63.2. Once the SNA is signed by the facility and accepted by LDEQ, the agreement is considered to be in effect for compliance purposes. SNAs are accepted or denied based on the correctness of the consolidation table, and the signature of a proper representative. Facilities operating a consolidated fugitive program must abide by the program’s consolidation guidelines. The guidelines consist of a set of rules called the workpractice terms and conditions and the stringency table (Table 9). Louisiana Fugitive Emission Program Consolidation Guidelines Workpractice Terms and Conditions These terms and conditions are to be used in conjunction with the stringency table (Table 9). Of the applicable equipment leak programs being consolidated, the program highest in the table hierarchy is to be considered the overall most stringent program under the guidelines. The guidelines may be used only in accordance with a SNA or a Title V permit. Applicability and Exemptions The consolidated program shall apply to the combined universe of components subject to any of the programs being consolidated. The consolidation of fugitive programs shall be conducted at a minimum of the process unit level, and may also be on a facility-wide basis. Consolidation of RCRA programs shall first be approved by LDEQ’s Waste Permits Division. Component types which do not require periodic monitoring under the overall most stringent program, shall be monitored as required by the most stringent requirements of any other program being consolidated and will not be exempted. The consolidated program shall include any exemptions based on size of component available in any of the programs being consolidated. The consolidated program cannot be used to replace requirements for area monitoring under the Vinyl Chloride NESHAP. For any compressor subject to a federal rule requiring a seal system including barrier fluid, sensor, and alarm, periodic monitoring of compressors may not be used in lieu of the seal system requirements, regardless of the overall most stringent program. Leak Definitions Leak definitions are based on the overall most stringent program as determined from Table 9. Phase-in periods allowed under federal regulations are not eliminated as long as there is no backsliding of existing monitoring programs. Monitoring Frequency Monitoring frequency shall be based on the overall most stringent program as determined from Table 9. Annual monitoring shall be defined as once every four quarters, regardless of the overall most stringent program. Some allowance may be made in the first year of the consolidation in order to allow for transition from existing monitoring schedules. Calibration Use of dilution device for calibration, as defined in Method 21, is acceptable. Identification of Components All leaking components must be tagged. If the Benzene NESHAP and a more stringent program are applicable, the overall most stringent program prevails and physical tagging of components is therefore not required. Identification, either by list or location (area or group) of affected components is acceptable. Leak Performance The determination of leak performance is based on the overall most stringent program as determined from Table 9. Repair Repair period requirements are always first attempt within 5 days of detecting the leak and final repair within 15 days of detecting the leak, regardless of the overall most stringent program. Post Repair Post repair inspection consists of remonitoring once within 3 months after repair of leaks, regardless of the overall most stringent program. Recordkeeping and Reporting Recordkeeping and reporting information requirements shall be based on the overall most stringent program as determined from Table 9. Reporting frequency shall be semiannual regardless of the overall most stringent program. Reports shall include records for any monitoring performed within the semiannual reporting period. Louisiana Consolidated Fugitive Emission Program Stringency Table Stringency Table (Table 9) This stringency table is to be used in conjunction with the workpractice terms and conditions. Consolidation is done between the groups listed. Of the applicable equipment leak programs being consolidated, the program in the highest group in the table hierarchy is to be considered the overall most stringent program under the guidelines. Referencing Subparts shall comply with the referenced program in the manner required by the provisions of the referencing Subpart. The guidelines may be used only in accordance with a SNA or a Title V permit. Programs shall be consolidated on a unit-wide or a facility-wide basis. Table 9 Stringency Table 40 CFR 65 Subpart FConsolidated Air Rule 40 CFR 63 Subpart HSOCMI HON MACT and Referencing Subparts 40 CFR 63 Subpart EEEEOrganic Liquids Distribution (Non-Gasoline) MACT (HON Option) 40 CFR 63 Subpart UUUUCellulose Products MACT (HON Option) 40 CFR 63 Subpart WPolymers and Resins II MACT 40 CFR 63 Subpart PPPPolyether Polyols Production MACT 40 CFR 63 Subpart UUGeneral MACT for Equipment Leaks—Control Level II and Referencing Subparts 40 CFR 63 Subpart YY—Generic MACT (Acetal Resins Production, Acrylic and Modacrylic Fibers Production, Cyanide Chemicals Manufacturing, Polycarbonates Production, Ethylene Processes) (UU Option) 40 CFR 63 Subpart OOO—Amino/Phenolic Resins Manufacturing MACT 40 CFR 63 Subpart EEEE—Organic Liquids Distribution (Non-Gasoline) MACT (Subpart UU Option) 40 CFR 63 Subpart FFFF—Miscellaneous Organic Chemical Manufacturing (Subpart UU Option) 40 CFR 63 Subpart UUUU—Cellulose Products MACT (Subpart UU Option) 40 CFR 63 Subpart GGGGG—Site Remediation MACT (Subpart UU Option) 40 CFR 63 Subpart HHHHH—Miscellaneous Coating Manufacturing MACT (Subpart UU Option) 40 CFR 63 Subpart U—Polymers and Resins I, Elastomer MACT 40 CFR 63 Subpart GGG—Pharmaceuticals Production MACT 40 CFR 63 Subpart MMM—Pesticide Active Ingredient Production MACT Louisiana MACT Determination for Non-HON Sources w/ Consent Decree Enhancements Louisiana MACT Determination for Refineries w/ Consent Decree Enhancements 40 CFR 60 Subpart VVa—NSPS for Equipment Leaks In SOCMI Facilities 40 CFR 60 Subpart GGGa—NSPS for Equipment Leaks in Petroleum Refineries Louisiana MACT Determination for Non-HON Sources Louisiana MACT Determination for Refineries LAC 33:III.2122—Louisiana Fugitive Emission Control for Nonattainment 40 CFR 63 Subpart CC—Refining MACT Modified HON option 40 CFR 61 Subpart F—National Emission Standard for Vinyl Chloride 40 CFR 61 Subpart V—National Emission Standard for Equipment Leaks and Referencing Subparts 40 CFR 61 Subpart J—National Emission Standard for Equipment Leaks of Benzene 40 CFR 63 Subpart HH—Oil and Natural Gas Production MACT 40 CFR 60 Subpart VV—NSPS for Equipment Leaks In SOCMI Facilities 40 CFR 60 Subpart GGG—NSPS for Equipment Leaks in Petroleum Refineries 40 CFR 60 Subpart KKK—NSPS for Equipment Leaks in Onshore Natural Gas Processing Plants 40 CFR 63 Subpart CC—Refinery MACT NSPS Option 40 CFR 63 Subpart TT—General MACT for Equipment Leaks—Control Level I and Referencing Subparts 40 CFR 63 Subpart EEEE—Organic Liquids Distribution (Non-Gasoline) MACT (Subpart TT Option) 40 CFR 63 Subpart FFFF—Miscellaneous Organic Chemical Production and Processes MACT (Subpart TT Option) 40 CFR 63 Subpart GGGGG—Site Remediation MACT (Subpart TT Option) 40 CFR 63 Subpart HHHHH—Miscellaneous Coating Manufacturing MACT (Subpart TT Option) 40 CFR 63 Subpart YY—Generic MACT (Acetal Resins Production, Acrylic and Modacrylic Fibers Production, Cyanide Chemicals Manufacturing, and Polycarbonates Production) (TT Option) 40 CFR 264—RCRA Subpart BB (LAC 33:V.1717.Subchapter B) 40 CFR 265—RCRA Subpart BB (LAC 33:V.4561.Subchapter R) LAC 33:III.2121—Louisiana Fugitive Emission Control 40 CFR 63 Subpart III—Flexible Polyurethane Foam Production MACT 40 CFR 63 Subpart R—Gasoline Distribution Terminals MACT and Referencing Subpart 40 CFR 63 Subpart HHHHH—Miscellaneous Coating Manufacturing MACT (Subpart R Option) 40 CFR 63 Subpart YY—Generic MACT (Hydrogen Fluoride Manufacturing)