LAC 33:V.30107. Matter Incorporated by Reference in Whole or in Part [49 CFR 195.3]

A. This part prescribes standards, or portions thereof, incorporated by reference into this part with the approval of the Director of the Federal Register in 5 U.S.C. 552(a) and 1 CFR part 51. The materials listed in this section have the full force of law. To enforce any edition other than that specified in this section, PHMSA must publish a notice of change in the Federal Register. 1. Availability of standards incorporated by reference. All of the materials incorporated by reference are available for inspection from several sources, including the following. a. The Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue SE., Washington, DC 20590. For more information contact 202-366-4046 or go to the PHMSA Web site at: http://www.phmsa.dot.gov/pipeline/regs. b. The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to the NARA Web site at: http://www. archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. c. Copies of standards incorporated by reference in this part can also be purchased from the respective standards-developing organization at the addresses provided in the centralized IBR section below. Source and Name of Referenced Material | Approved for Title 33 Reference B. American Petroleum Institute (API), 200 Massachusetts Avenue NW, Suite 1100., Washington, DC 20001-5571, phone: 202-682-8000, http://api.org/. 1. API Publication 2026, “Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service,” 3rd edition, June 2017 (API Pub 2026). | §30405 2. API Recommended Practice 5L1, “Recommended Practice for Railroad Transportation of Line Pipe,” 7th edition, September 2009, (API RP 5L1). | §30207.A 3. API Recommended Practice 5LT, “Recommended Practice for Truck Transportation of Line Pipe,” First edition, March 12, 2012, (API RP 5LT). | §30207.C 4. API Recommended Practice 5LW, “Recommended Practice Transportation of Line Pipe on Barges and Marine Vessels,” 3rd edition, September 2009, (API RP 5LW). | §30207.B 5. ANSI/API Recommended Practice 651, “Cathodic Protection of Aboveground Petroleum Storage Tanks,” 4th edition, September 2014, (API RP 651). | §§30565.A; 30573.D 6. ANSI/API Recommended Practice 652, “Linings of Aboveground Petroleum Storage Tank Bottoms,” 3rd edition, October 2005, (API RP 652). | §30207.B 7. API Recommended Practice 1130, “Computational Pipeline Monitoring for Liquids: Pipeline Segment,” 3rd edition, September 2007, (API RP 1130). | §30207.B 8. API Recommended Practice 1162, “Public Awareness Programs for Pipeline Operators,” 1st edition, December 2003, (API RP 1162). | §§30440.A; 30440.B; 30440.C 9. API Recommended Practice 1165, “Recommended Practice for Pipeline SCADA Displays,” First edition, January 2007, (API RP 1165). | §30446.C 10. API Recommended Practice 1168, “Pipeline Control Room Management,” First edition, September 2008, (API RP 1168). | §§30446.C; 30446.F 11. API Recommended Practice 2003, “Protection against Ignitions Arising out of Static, Lightning, and Stray Currents,” 7th edition, January 2008, (API RP 2003). | §30405.A 12. API Recommended Practice 2350, “Overfill Protection for Storage Tanks in Petroleum Facilities,” 5th edition, September 2020, (API Std 2350). | §30428.C 13. API Specification 5L, “Specification for Line Pipe,” 46th edition, April 2018, including Errata 1 (May 2018), (API Spec 5L). | §§30161.B; 30161.E 14. API Specification Spec 6D, “Specification for Pipeline and Piping Valves,” 24rd edition, effective August 2014, including Errata 1 through 10(October 2014 through July 2021), Addendum 1 (March 2015), Addendum 2 (June 2016), (API Spec 6D). | §30173.D 15. API Specification 12F, “Specification for Shop Welded Tanks for Storage of Production Liquids,” 12th edition, October 2008, effective April 1, 2009, (API Spec 12F). | §§30189.B; 30205.B; 30264.B; 30264.E; 30307.A; 30565; 30549.D 16. API Standard 510, “Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration,” 9th edition, June 2006, (API Std 510). | §§30205.B; 30432.C 17. API Standard 620, “Design and Construction of Large, Welded, Low-Pressure Storage Tanks,” 12th edition effective October 2013, including Addendum 1 (November 2014), (API Std 620). | §§30189.B; 30205.B; 30264.B; 30264.E; 30307.B; 30565; 30579.D 18. API Standard 650, “Welded Steel Tanks for Oil Storage,” 13th edition, March 2020, including Errata 1 (January 2021), (API Std 650). | §§30189.B; 30205.B; 30264.B; 30264.E; 30307.C; 30307.D; 30565; 30579.D 19. API Standard 653, “Tank Inspection, Repair, Alteration, and Reconstruction,” 3rd edition, December 2001, (including addendum 1 (September 2003), addendum 2 (November 2005), addendum 3 (February 2008), and errata (April 2008)), (API Std 653). | §§30205.B; 30307.D; 30432.B 20. API Standard 1104, “Welding of Pipelines and Related Facilities,” 21st edition, September 2013, including Errata 1 through 5 (April 2014 through September 2018), Addendum 1 (July 2014), and Addendum 2 (May 2016), (API Std 1104)). | §§30446.C; 30446.F 21. ANSI/API Standard 2000, “Venting Atmospheric and Low-pressure Storage Tanks,” 7th Edition, March 2014, Reaffirmed April 2020, (API Std 2000). | §30264.E 22. API Standard 2510, “Design and Construction of LPG Installations,” 8th edition, 2001, (API Std 2510). | §§30189.B; 30205.B; 30264.B; 30307.E; 30428.C; 30432.C 23. API Standard 1163, “In-Line Inspection Systems Qualification” Second edition, April 2013, (API Std 1163). | §30591 C. The American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016, 800-843-2763 (U.S/Canada), Web site: http://www.asme.org/. 1. ASME/ANSI B16.9-2007, “Factory-Made Wrought Buttwelding Fittings,” December 7, 2007, (ASME/ANSI B16.9). | §30175.A 2. ASME/ANSI B31G-1991 (Reaffirmed 2004), “Manual for Determining the Remaining Strength of Corroded Pipelines,” 2004, (ASME/ANSI B31G). | §§30452.H; 30587; 30588.C 3. ASME B31.4-2006, “Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids” October 20, 2006, (ASME B31.4). | §§30165.A; 30452.H 4. ASMEB31.8-2018, “Gas Transmission and Distribution Piping Systems,” Issued November 20, 2018, (ASME B31.8). | §§30111.A; 30406.A 5. ASME Boiler & Pressure Vessel Code, Section VIII, Division 1, “Rules for Construction of Pressure Vessels,” 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 1). | §§30181; 30307.E 6. ASME Boiler & Pressure Vessel Code, Section VIII, Division 2, “Alternate Rules, Rules for Construction of Pressure Vessels,” 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 2). | §30307.E 7. ASME Boiler & Pressure Vessel Code, Section IX: “Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators,” 2007 edition, July 1, 2007, (ASME BPVC, Section IX). | §30222.A D. American Society for Nondestructive Testing, P.O. Box 28518, 1711 Arlingate Lane, Columbus, OH 43228. https://asnt.org. 1. ANSI/ASNT ILI-PQ-2005(2010), “In-line Inspection Personnel Qualification and Certification” reapproved October 11, 2010, (ANSI/ ASNT ILI-PQ). | §30591 2. [Reserved] E. American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 119428, phone: 610-832-9585; email: service@astm.org;, Web site: http://www.astm.org/. 1. ASTM A53/A53M-20, “Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless,” approved July 2020, (ASTM A53/A53M). | §30161.E 2. ASTM A106/A106M-19A, “Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service,” approved November 1, 2019, (ASTM A106/A106M). | §30161.E 3. ASTM A333/A333M-18, “Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness,” approved November 1, 2018, (ASTM A333/A333M | §30161.E 4. ASTM A381-96 / A381M-18 “Standard Specification for Metal-Arc Welded Steel Pipe for Use with High-Pressure Transmission Systems,” approved November 1, 2018, (ASTM A381). | §30161.E 5. ASTM A671/A671M-20, “Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures,” approved March 1, 2020, (ASTM A671/A671M | §30161.E 6. ASTM A672/A672M-09, “Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures,” approved October 1, 2009, (ASTM A672/A672M | §30161.E 7. ASTM A691/A691M-19, “Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures,” approved November 1, 2019, (ASTM A691). | §30161.E F. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park St. NE., Vienna, VA 22180, phone: 703-281-6613, Web site: http://www.mss-hq.org/. 1. MSS SP-75-2019 Standard Practice, High-Strength, Wrought, Butt-Welding Fittings,” published December 2019, (MSS SP 75), IBR approved for §195.118(a). | §30175.A 2. [Reserved] G. Association for Materials Protection and Performance (AMPP), 15835 Park Ten Place, Houston, TX 77084; phone: (800) 797-6223; website: https://ampp.org/standards. 1. NACE SP0169-2007, Standard Practice, “Control of External Corrosion on Underground or Submerged Metallic Piping Systems” reaffirmed March 15, 2007, (NACE SP0169). | §§30571; 30573 2. ANSI/NACE SP0502-2010, Standard Practice, “Pipeline External Corrosion Direct Assessment Methodology,” June 24, 2010, (NACE SP0502). | §30588.B 3. ACE SP0102-2010, “Standard Practice, Inline Inspection of Pipelines” revised March 13, 2010, (NACE SP0102). | §§30177; 30591 4. NACE SP0204-2015, Stress Corrosion Cracking (SSC) Direct Assessment Methodology, Revised March 14, 2015, (NACE SP0204) | §30588.C H. National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169, phone: 617-984-7275, Web site: http://www.nfpa.org/. 1. NFPA-30 (2012), “Flammable and Combustible Liquids Code,” including Errata 30-12-1 (9/27/11), and Errata 30-12-2 (11/14/11), 2012 edition, copyright 2011, (NFPA-30). | §30264.B 2. [Reserved] I. Pipeline Research Council International, Inc. (PRCI), c/o Technical Toolboxes, 3801 Kirby Drive, Suite 520, P.O. Box 980550, Houston, TX 77098, phone: 713-630-0505, toll free: 866-866-6766, Web site: http://www.ttoolboxes.com/. 1. AGA Pipeline Research Committee, Project PR-3-805 “A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe,” December 22, 1989, (PR-3-805 (RSTRING)). IBR approved for §§195.452(h); 195.587; and 195.588(c). | §§30587; 30588.C 2. [Reserved]