LAC 33:V.30175. Fittings [49 CFR 195.118]

A. Butt-welding type fittings must meet the marking, end preparation, and the bursting strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see §30107). [49 CFR 195.118(a)] B. There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting. [49 CFR 195.118(b)] C. The fitting must be suitable for the intended service and be at least as strong as the pipe and other fittings in the pipeline system to which it is attached. [49 CFR 195.118(c)]