LAC 33:V.4051. Analysis Plan

Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of LAC 33:V.4047 and, if applicable, LAC 33:V.4081. The owner or operator must keep the plan at the facility. A. Rebuttable Presumption for Used Oil in LAC 33:V.4047. At minimum, the plan must specify the following: 1. whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination; 2. if sample analyses are used to make this determination: a. the sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either: i. one of the sampling methods in LAC 33:V.4999.Appendix D; or ii. a method shown to be equivalent under LAC 33:V.105.H and I; b. the frequency of sampling to be performed and whether the analysis will be performed on-site or off-site; and c. the methods used to analyze used oil for the parameters specified in LAC 33:V.4047; and 3. the type of information that will be used to determine the halogen content of the used oil. B. On-Specification Used Oil Fuel in LAC 33:V.4081. At a minimum, the plan must specify the following if LAC 33:V.4081 is applicable: 1. whether sample analyses or other information will be used to make this determination; 2. if sample analyses are used to make this determination: a. the sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either: i. one of the sampling methods in LAC 33:V.4999.Appendix D; or ii. a method shown to be equivalent under LAC 33:V.105.H and I; b. whether used oil will be sampled and analyzed prior to or after any processing/re-refining; c. the frequency of sampling to be performed and whether the analysis will be performed on-site or off-site; and d. the methods used to analyze used oil for the parameters specified in LAC 33:V.4081; and 3. the type of information that will be used to make the on-specification used oil fuel determination.