Hazardous Waste from Non-specific Sources

Hazardous Waste No. Hazardous Waste Generic F001 The following spent halogenated solvents used in degreasing: tetrachloroethylene, trichloroethylene, methylene chloride. 1,1,1,-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (T) F002 The following spent halogenated solvents: tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1,-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2, 2,-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane and 1,1,2-trichloroethane; all spent solvent mixtures/blends containing, before use, a total of 10% or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F001, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (T) F003 The following spent non-halogenated solvents: xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol: all spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents; and all spent solvent mixtures/blends containing, before use, one or more of the above non- halogenated solvents, and a total of 10% or more (by volume) of one or more of those solvents listed in F001, F002, F004 and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (I) F004 The following spent non-halogenated solvents: cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of 10% or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002 and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (T) F005 The following spent non-halogenated solvents: toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all spent solvent mixtures/blends containing, before use, a total of 10% or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, and F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (I,T) F006 Wastewater treatment sludges from electroplating operations except from the following processes: (1) sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum. (T) F007 Spent cyanide plating bath solutions from electroplating operations. (R,T) F008 Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process. (R, T) F009 Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process. (R, T) F010 Quenching bath residues from oil baths from metal heat treating operations where cyanides are used in the process. (R, T) F011 Spent cyanide solutions from salt bath pot cleaning from metal heat treating operations. (R, T) F012 Quenching wastewater treatment sludges from metal heat treating operations where cyanides are used in the process. (T) F019 Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process. (T) F020 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or compound in a formulating process) of trichlorophenol or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. This listing does not include wastes from the production of hexachlorophene from highly purified 2,4,5-trichlorophenol. (H) F021 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of pentachlorophenol, or of intermediates used to produce its derivatives. (H) F022 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetrachlorobenzene, pentachlorobenzene, or hexachlorobenzene under alkaline conditions. (H) F023 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of trichlorophenols and tetrachlorophenols. This listing does not include wastes from equipment used only for the production or use of hexachlorophene from highly purified 2,4,5-trichlorophenol. (H) F024 Wastes from the production, utilizing free radical catalyzed processes, of chlorinated aliphatic hydrocarbons having one, two, three, four, or five carbon atoms. These wastes include, but are not limited to, distillation residues, heavy ends, tars, and reactor cleanout wastes. These wastes do not include light ends, spent filters and filter aids, spent dessicants, wastewater, wastewater treatment sludges, spent catalysts, and wastes listed in 310 CMR 30.131 or 30.132. (T) F025 Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. (T) F026 Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetrachlorobenzene, pentachlorobenzene, or hexachlorobenzene under alkaline conditions. (H) F027 Discarded unused formulations containing trichlorophenol, tetrachlorophenol, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. This listing does not include formulations containing hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component. (H) F028 Residues resulting from the incineration or thermal treatment of soil contaminated with hazardous waste having EPA Hazardous Waste Nos. F020, F021, F022, F023, F026 or F027. (T) F032 Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations (except potentially cross-contaminated wastes that have had the F032 waste code deleted in accordance with 40 CFR 261.35 or potentially cross-contaminated wastes that are otherwise currently regulated as hazardous wastes (i.e., F034 or F035), and where the generator does not resume or initiate use of chlorophenolic formulations). This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. (T) F034 Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. (T) F035 Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. (T) F037 Petroleum refinery primary oil/water/solids separation sludge. Any sludge generated from the gravitational separation of oil/water/solids during the storage or treatment of process wastewaters and oilycooling wastewaters from petroleum refineries. Such sludges include, but are not limited to, those generated in: oil/water/solids separators; tanks and impoundments; ditches and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in 40 CFR 261.31(b)(2) _____________________________________________________ (including sludges generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units), and K051 wastes are not included in this listing. This listing does include residuals generated from processing or recycling oil-bearing hazardous secondarymaterials excluded under 40 CFR 261.4(a)(12)(i), if those materials are to be disposed of. (T) F038 Petroleum refinerysecondary(emulsified) oil/water/solidsseparation sludge. Anysludge and/or float generated from the physical and/or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. Such wastes include, but are not limited to, all sludges and floats generated in: induced air flotation (IAF) units, tanks and impoundments, and all sludges generated in dissolved air flotation (DAF) units. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges and floats generated in aggressive biological treatment units as defined in 40 CFR 261.31(b)(2), (including sludges and floats generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and F037, K048, and K051 wastes are not included in this listing. (T) F039 Leachate resulting from the treatment, storage, or disposal of wastes classified by more than one waste code under 310 CMR 30.131 through 30.136, or from a mixture of wastes classified under 310 CMR 30.120 through 30.125 and 30.131 through 30.136. (Leachate resulting from the management of one or more of the following EPA Hazardous Wastes and no other hazardous waste retains its hazardous waste code(s): F020, F021, F022, F026, F027, and/or F028.) (T) MA01 Waste oil1 means used or unused waste oil (or any mixture thereof) that is not otherwise hazardous waste pursuant to 310 CMR 30.120 through 30.136, except that used waste oil that has a flash point greater than or equal to 100° F and less than 140° F (solely through use) remains subject to regulation as used waste oil. MA02 Wastes which contain polychlorinated biphenyls (PCBs) in concentrations equal to or greater than 50 parts per million. MA04 Waste generated in the manufacture of paint (e.g., oils, shellac, varnish, stains, lacquer, latex, enamel, alkyds, urethanes, acrylics, casein) which is not otherwise regulated as hazardous waste pursuant to 310 CMR 30.120 through 30.125 (characteristics of hazardous waste) or 310 CMR 30.130 through 30.136 (lists of hazardous wastes) if: (1) The paint is formulated with one or more ingredients which are listed as hazardous constituents in 310 CMR 30.160; or (2) The paint is formulated with any ingredient which contains 1% or more by weight of hazardous constituents listed in 310 CMR 30.160.