Transport and Manifest Standards

[Note: A transporter of Class A Regulated Recyclable Material (RRM), including specification used oil fuel, is required to comply with all US DOT regulations applicable to the shipment of hazardous materials.] (1) A transporter of specification used oil fuel shall be licensed to transport hazardous waste pursuant to 310 CMR 30.000 (2) A transporter of any Class A regulated recyclable material other than specification used oil fuel shall be either: (a) licensed to transport hazardous waste pursuant to 310 CMR 30.000, or (b) a person who 1. transports Class A regulated recyclable material in full compliance with all applicable State and Federal regulations including, but not limited to, M.G.L. c. 159B, and 2. transports, from or to any point in Massachusetts, no hazardous waste, and no regulated recyclable material other than Class A regulated recyclable material. (3) A transporter of Class A regulated recyclable material may cause or allow such material to be transported off the site of generation directly to either (a) a facility described in 310 CMR 30.222(1), or (b) a transporter described in 310 CMR 30.223(1). (4) Class A regulated recyclable material transported by a transporter described in 310 CMR 30.223(1) or 310 CMR 30.223(2)(a) shall be accompanied by either: (a) a manifest filled out, signed, and distributed in compliance with all provisions of 310 CMR 30.000 governing the filling out, signing, and distribution of copies of manifests; or (b) a shipping paper which shall describe the transportation of the material, shall accompany the material at all times while it is being transported, shall be made available to the Department by the generator, transporters or recycling facility on request, and shall contain at least the following: 1. the transporter's name, address, EPA identification number, and hazardous waste transporter license number; 2. the date of collection of the Class A regulated, recyclable material from the generator; 3. the name and address of the generator from whom Class A regulated, recyclablematerial was collected on that date; 4. the amount of Class A regulated, recyclable material collected from the generator; 5. the location of the recycling facility taking delivery and custody of the Class A regulated, recyclable material from the last transporter, including the facility's name, address, EPA identification number, and license or permit identification; 6. the dated signature of the generator from whom Class A regulated, recyclable material was collected; 7. the dated signature of the transporter's employee making the collection, and of all subsequent transporters; 8. the dated signature of the recycling facility's owner or operator, or his or her designee; and 9. for any specification used oil fuel being transported, the shipping paper shall identify the material as "specification used oil fuel". (5) Class A regulated recyclable material transported by a transporter described in 310 CMR 30.223(2)(b) shall be accompanied by a shipping paper filled out and signed pursuant to 310 CMR 30.223(4)(b). (6) A transporter of Class A regulated recyclable material described in 310 CMR 30.223(1) or 30.223(2) shall retain for at least three years from the date it accepts Class A regulated recyclable material from a generator, a copy of the shipping paper or manifest used to comply with 310 CMR 30.223(4). All record-keeping shall be in compliance with 310 CMR 30.007. (7) A transporter of Class A regulated recyclable material using the shipping paper required by 310 CMR 30.223(4)(b) shall provide the generator of the regulated recyclable material with a copy of the shipping paper after it is signed by the recycling facility pursuant to 30.223(4)(b)8.