523 CMR 23.02
Requirements for Ring
(1) Southeast Asian Kickboxing competitions must be conducted in a ring in conformance with 523
CMR 23.02(2).
(2) A ring used for a contest or exhibition of Southeast Asian Kickboxing must meet the following
requirements:
(a) The ring may be either of three sizes; 18 feet x 18 feet, 20 feet x 20 feet, or 24 feet x 24 feet,
measured from the inner side of the ropes.
(b) The ring floor shall be soundly constructed with no obstructions, and extend at least three feet
but not more than four feet beyond the ropes.
(c) The ring floor shall be based on either felt, rubber or other flexible materials not less than ¼
inch and not more than ½ inch thick, entirely covered with canvas stretched tightly over the entire
ring floor.
(d) All four ring corners must be erected with four ring posts of five inches in diameter. The
erected height must be 60 inches from the ring floor and the inner corners of the ropes must be
completely taped to prevent harm to competitors.
1/27/17 (Mass. Register #1331)
(e) There shall be a minimum of four ropes at least 1.18 inches and not more than 1.97 inches
diameter, stretched tightly to the four corner posts. Each side of the rope ring shall be held rigid
by two pieces of strong cloth equally spaced each side. The tightening cloths shall not slip when
the ropes are moved.
(f) There shall be at least two sets of steps to the ring: one set of steps at each of the red and blue
corners provided for the competitors and their seconds.