Michigan · Regulations
R 408.12601 to 408.12650 — Part 26. Metalworking Machinery
39 sections
39 sections
- R 408.12601R 408.12601 Scope.
- R 408.12602R 408.12602 Applicability.
- R 408.12603R 408.12603 Definitions; A to C.
- R 408.12604R 408.12604 Definitions; F to L.
- R 408.12605R 408.12605 Definitions; M, O.
- R 408.12606R 408.12606 Definitions; P.
- R 408.12607R 408.12607 Definitions; R, S.
- R 408.12608R 408.12608 Definitions; T to W.
- R 408.12611R 408.12611 Employer responsibility.
- R 408.12612R 408.12612 Employee responsibility.
- R 408.12613R 408.12613 Rescinded.Repealed
- R 408.12614R 408.12614 Rescinded.Repealed
- R 408.12615R 408.12615 Aisles, floors, and platforms.
- R 408.12616R 408.12616 Machine and equipment installation.
- R 408.12617R 408.12617 Controls.
- R 408.12618R 408.12618 Maintenance and lubrication.
- R 408.12619R 408.12619 Hydraulic and pneumatic systems.
- R 408.12620R 408.12620 Chip guards; protection from coolant splash.
- R 408.12622R 408.12622 Electric magnets and vacuum chucks.
- R 408.12631R 408.12631 Squaring shear.
- R 408.12632R 408.12632 Circular metal saws.
- R 408.12633R 408.12633 Bar stock and rod machines; screw machines; tread machines.
- R 408.12634R 408.12634 Planers.
- R 408.12635R 408.12635 Metal band saws.
- R 408.12636R 408.12636 Metal embossing machines.
- R 408.12637R 408.12637 Powered feed rolls.
- R 408.12638R 408.12638 Wire drawing machines.
- R 408.12639R 408.12639 Boring, honing, reaming, and drilling.
- R 408.12640R 408.12640 Milling.
- R 408.12641R 408.12641 Roll-form machines.
- R 408.12642R 408.12642 Powered benders.
- R 408.12643R 408.12643 Tumbling mills, barrels and revolving cylinders.
- R 408.12644R 408.12644 Alligator shears.
- R 408.12645R 408.12645 Riveters, braders and stakers.
- R 408.12646R 408.12646 Powered clamping device.
- R 408.12647R 408.12647 Slitter.
- R 408.12648R 408.12648 Lathes.
- R 408.12649R 408.12649 Cold header.
- R 408.12650R 408.12650 Multislide machines.