R 408.10198
R 408.10198 Figures.
Cite as Mich. Admin. Code R 408.10198
Rule 198. Figures 1 to 23 read as follows:
FIGURES 1 TO 23
FIGURE 1
FIGURE 2
FIGURE 3
TYPICAL DRAWN STEEL GUARD FOR WHEELS
8 inches Diameter and Smaller a, b & c
FIGURE 4
DRAWN STEEL GUARD FOR PORTABLE GRINDERS
USED WITH DEPRESSED CENTER WHEELS
FIGURE 5
FIGURE 6
TYPICAL FABRICATED STEEL BAND-TYPE GUARD
FOR SQUARED OR TAPERED CUP WHEELS
FIGURE 7
TYPICAL DRAWN STEEL BAND-TYPE GUARD FOR TAPERED CUP WHEELS
FIGURE 8
FIGURE 9
MINIMUM BASIC THICKNESS OF PERPHERAL
AND SIDE MEMBERS FOR SAFETY GUARDS
FIGURE 10
BAND-TYPE GUARD FOR RING, SEGMENT, NUT INSERTED WHEELS
FIGURE 11
FIGURE 12
FIGURE 13
FIGURE 14
CENTRAL NUT MOUNTING
FIGURE 15
MULTIPLE SCREW MOUNTING
FIGURE 16
FIGURE 17
MULTIPLE SCREW MOUNTING
FIGURE 18
CENTRAL NUT MOUNTING
FIGURE 19
DOUBLE END SPINDLE
FIGURE 20
OPEN END SPINDLE
FIGURE 21
FIGURE 22
Pd shall never be less than
nor shall the difference
between D and Pd exceed 2 inches. It is recommended that
Pd equal D wherever practical.
FIGURE 23
DEFINING OVERHAND DIMENSIONS IN TABLES 23 TO 31