R 408.12111 Adopted and referenced standards.

Rule 2111. (1) The following standards are adopted by reference in these rules and are available from IHS Global, 15 Inverness Way East, Englewood, Colorado, 80112, USA, telephone number: 1-800-854-7179 or via the internet at website: http://global.ihs.com; at a cost as of the time of adoption of these rules, as stated in these rules. (2) A powered industrial truck manufactured after January 15, 1971, but before 1993, shall be certified by the manufacturer that the truck covered by this part has been produced according to the mandatory requirements of sections 3 and 4, except subsection 421 of section 4, of the American National Standards Institute Standard ANSI standard B56.1 “Safety Standards For Powered Industrial Trucks,” 1969 edition. Cost: $60.00. (3) A low lift or high lift truck manufactured after April 26, 2000 shall be in compliance with the requirements of ANSI standard B56.1 “Safety Standard For Low Lift And High Lift Trucks,” 1993 edition, except as noted in subrule(1) of this rule. Cost: $61.00. (4) A rough terrain fork lift truck manufactured after April 26, 2000 shall be in compliance with the requirements of ANSI standard B56.1 “Rough Terrain Fork Lift Trucks,” 1993 edition. Cost: $68.00. (5) A industrial crane truck manufactured after April 26, 2000 shall be in compliance with ANSI standard B56.7 “Safety Standard For Industrial Crane Trucks,” 1987 edition. Cost: $60.00. (6) A tow tractor manufactured after April 26, 2000 shall be in compliance with ANSI standard B56.92 “Operator Controlled Industrial Tow Tractors,” 1992 edition. Cost: $56.00. (7) A manually propelled high lift industrial truck manufactured after April 26, 2000 shall be in compliance with ANSI standard B56.10 “Manually Propelled High Lift Industrial Trucks,” 1992 edition. Cost: $105.00. (8) National Fire Protection Agency Standard NFPA 505 “Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations,” 1996 edition. Cost: $27.00. (9) The standards adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143. (10) The standards adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, plus $20.00 for shipping and handling. (11) The following Michigan Occupational Safety and Health Administration (MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards may be obtained at no charge from the Michigan Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P. O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, at the time of adoption of these rules, is 4 cents per page. (a) General Industry Safety and Health Standard Part 1 “General Provisions,” R 408.10001 to R 408.10098. (b) General Industry Safety and Health Standard Part 2 “Walking-Working Surfaces,” R 408.10201 to R 408.10241. (c) General Industry Safety and Health Standard Part 33 “Personal Protective Equipment” R 408.13301 to R 408.13398. (d) General Industry Safety Standard Part 56 “Storage and Handling of Liquefied Petroleum Gases,” R 408.15601 to R 408.15601. (e) General Industry Safety Standard Part 75 “Flammable Liquids,” R 408.17501 to R 408.17502. (f) General Industry Safety Standard Part 92 “Hazard Communication,” R 408.19201 to R 408.19204. (g) Occupational Health Standard Part 433 “Personal Protective Equipment,” R 325.60001 to R 325.60013. (h) Occupational Health Standard Part 472 “Medical Services and First Aid,” R 325.47201 to R 325.47201. NAMEPLATES AND MARKINGS