R 408.12334 Pull-out devices.

Rule 2334. (1) A pull-out device shall include attachments for the operator's hands or arms. The attachments shall be connected to the slide or upper die of the press so that the operator's hands or fingers are removed from the point of operation as the slide descends. (2) Authorized personnel shall be trained and shall be responsible for proper adjustment of the device for each die setup and operator change. They shall make periodic inspections to determine condition of worn and broken parts which shall be replaced before permitting operation. (3) If more than 1 operator is required on a press, a set of pull-out devices shall be provided for each operator. (4) Each pull-out device in use shall be visually inspected and checked for proper adjustment at the start of each operator shift, following a new die set-up, and when operators are changed. Necessary maintenance or repair, or both, shall be performed and completed before the press is operated. Records of maintenance shall be kept pursuant to R 408.12373.