R 408.12708 Definitions; R to T.

Rule 2708. (1) "Radial saw" means a machine with a circular blade suspended from a horizontal arm which is pulled through the material. (2) "Revolving tool lathe" means a lathe where revolving multiple cutters shape cut revolving stock held between 2 points. (3) "Router" means a machine with a revolving vertical cutter and a motor suspended over a table and used to cut to a predetermined design. (4) "Run" means the distance from pulley to pulley. (5) "Swing saw" means a machine suspended above a table and equipped with a circular blade which swings forward from an overhead pivot point. (6) "Tenoner" means a machine equipped with horizontal and vertical circular blades to cut tenons and perform trimming operations.